Log4OM

K7SR

The problem turned out to be my county had been incorrectly entered as "USA" rather than "Snohomish". This was incorrect from the time I originally started to use Log4om, several years ago. There was no problem with this until I updated TQSL, my TQSL certificate, and Log4om all a...

K7SR

I updated to log4om v1 1.41 and at the same time I updated my tqsl certificate. After updating, when I try to upload to lotw I get the following message in the upload window. "all qsos were duplicate or out of date range(no qsos written)". I have verified that the tqsl certificate serial n...

K7SR

DF5WW

I assume that this means that if I delete the xxx_user.csv the installation will revert to the xxx.csv. Is this correct??

Mike Fager, K7SR

K7SR

I verified that the config file was 11.8 and then replaced the modelist.csv with the new one in the LogOM directory. The results were the same. I then modified the Modelist_user.csv file in the LogOM directory to look like the Modelist.csv file and tried it again. IT WORKED!!! The question is: why i...

K7SR

Terry, Doug In looking further I noted that my copy of modelist.csv is dated 6/15/2019. While searching further I found that in Roaming/LogOM/Backup there are zip files for each backup that has a file named Modelist_user.csv. The latest of these has a date of 7/30/2019. These csv files do not have a...

K7SR

Terry, Doug

Modelist.csv was correct.

I have sent a help email to ARRL. Will post results.

Thanks

Mike Fager, K7SR

K7SR

Terry Sorry to be so long in getting back. Other activities got in the way. Further investigation has revealed that when download is executed using Log4OM QSL Management, the resultant donwload text has MFSK8 instead of FT4. As I stated in the first message, LOTW shows it as FT4. This sounds like ei...

K7SR

After updating Log4OM, TrustedQSL, WSJT-X, and JTAlert to the latest versions I have verified that LOTW is handling the FT4 logging correctly after receiving the information from Log4OM. However, when I download the LOTW info using Log4OM "QSL Management" it still shows the all of FT4 cont...

K7SR

My situation of yesterday was caused by tqsl not being updated until I used it to send the adif file. All works fine after the update.

K7SR

Yesterday I installed the latest Log4om (1.30.0.0), latest wsjt-x, and latest jtalert. I made 15 contacts today, 12 were ft8. All logged correctly. I then uploaded them to lotw using log4om, but the 12 ft8's were rejected. I exported the ft8's to an adif file and, using tqsl uploaded them to lotw wi...

Search found 11 matches

Re: Cannot upload to lotw after update to 1.41

Cannot upload to lotw after update to 1.41

Re: FT4 verification with LOTW

Re: FT4 verification with LOTW

Re: FT4 verification with LOTW

Re: FT4 verification with LOTW

Re: FT4 verification with LOTW

FT4 verification with LOTW

Re: FT8

Re: FT8