Log4OM

N6VH

Terry, I uninstalled 2.32.1.0, then downloaded 2.32.1.0 (the latest version listed) and installed it again. No change in those boxes. This isn't a major issue for me, but there might be others that have this problem and not notice it. I didn't notice it until this discussion, be cause most of my QSO...

N6VH

Terry,

I'm using the default settings, as shown in the attached picture.

73,

Jim N6VH

: Display.jpg (64.94 KiB) Viewed 208 times

N6VH

Terry, The problem is actually the "ITU" and "CQ" boxes in the QSO entry screen. Apparently, they aren't large enough to show two digits. They only show one digit, at least on my computer, but if I click on the down arrow in each box, both digits are displayed. This is true for b...

N6VH

Nolan, I don't use lookups, because I work POTA stations, and the info returned from the lookup might not always be correct. Even if they aren't doing POTA, they might not be at their home QTH. A station could listed in Florida CQ 5, for example, but be operating in Texas CQ 4. I do have my Info pro...

N6VH

I'm using 2.32.1.0 and, using manual input, I can confirm there are many zone errors. For example, G4POP shows CQ zone 1 and ITU 2. I have "Use Clublog database" and "Use CTY database" checked.

73,
Jim N6VH

N6VH

Unfortunately, some stations operate in a country other than their own without using proper identification, in particular on FTxx modes. For example, if I were to operate in British Columbia, I would be required to sign N6VH/VE7. By doing so, I couldn't send my grid square in my CQ message (not real...

N6VH

I ran a test without WSJT-X running. I tested with the rig in USB and then CW. In both cases, when I got within about 500 Hz of the FT8 frequency, 24,915 in this case, Log4OM switched to FT8 mode. In Configuration/CAT Management, I do NOT have "Switch to DIGITAL mode when required" checked...

N6VH

I was having the same problem, and was preparing to post about it when I saw this topic. In my case, I am using a Yaesu FTDX-101MP and the Win4Yaesu app. I had been using Omnirig 1.19, but just now installed 1.2, then restarted Log4OM 2.32.1.0. In my case the frequency is being populated as it shoul...

N6VH

Are you referring to the state that the recipient of your card lives in? I checked on the ARRL web page about the incoming buro, and didn't see anything about a state being required. Card for the ARRL incoming buro go to the call area of the ham's call. For example, a W6 living in Texas would get hi...

N6VH

As a hunter, the easy way to enter the POTA number is to put "POTA" and the park number in the comments box - POTA K-0042 - for example. It will be automatically be put into the Award Refs. section for that QSO. If you are using WSJT-X (or other similar apps) along with JTAlert for FT8/FT4...

Search found 190 matches

Re: Erreurs ...

Re: Erreurs ...

Re: Erreurs ...

Re: Erreurs ...

Re: Erreurs ...

Re: POTA not storing in REF if activator in different country

Re: How to prevent mode changes when changing frequency?

Re: Frequency not auto populating

Re: ARRL is not accepting qsl cards without State printed

Re: POTA Data Entry On New Contact