Search found 8 matches
- 28 Sep 2017, 17:22
- Forum: User Support
- Topic: CAT connection to yaesu FT 747GX
- Replies: 25
- Views: 24930
Re: CAT connection to yaesu FT 747GX
Well I am pleased to report that after over 1 Year of playing about trying to get the CAT working on my FT747 I have finally got it working perfectly with the help of Terry. Terry had remoted on to my computer for me and checked all the settings and advised me that the ZLP CAT cable was very good. h...
- 26 Sep 2017, 05:21
- Forum: User Support
- Topic: CAT connection to yaesu FT 747GX
- Replies: 25
- Views: 24930
Re: CAT connection to yaesu FT 747GX
Just to say thanks to Patrice who suggested FLrig. This works without issue on the 747. How strange that Omnirig or Hamlin won't work.. Deffinatley a software config issue somewhere. The Baud rate, Com port and stop bits are the same as the other two software. The only difference I can see so far is...
- 24 Sep 2017, 20:09
- Forum: User Support
- Topic: CAT connection to yaesu FT 747GX
- Replies: 25
- Views: 24930
Re: CAT connection to yaesu FT 747GX
Thanks Terry I will have a go.
- 23 Sep 2017, 17:23
- Forum: User Support
- Topic: CAT connection to yaesu FT 747GX
- Replies: 25
- Views: 24930
Re: CAT connection to yaesu FT 747GX
Could I ask if this ever got sorted out as I am having the same issue with my FT747??
DE 2E0DYP
DE 2E0DYP
- 21 Oct 2016, 09:05
- Forum: User Support
- Topic: Log40M CAT - Hamlib - Omnirig
- Replies: 4
- Views: 3044
Re: Log40M CAT - Hamlib - Omnirig
Thanks Terry,
I will try tweaking the settings. Funny thing is it dies work for around 30 seconds perfectly. I can see the CAT icon on the rig going on and off every few seconds as if it is polling. So I am guessing the cable and Rig are OK.
Thanks again for your help on this.
Wayne
2E0DYP
I will try tweaking the settings. Funny thing is it dies work for around 30 seconds perfectly. I can see the CAT icon on the rig going on and off every few seconds as if it is polling. So I am guessing the cable and Rig are OK.
Thanks again for your help on this.
Wayne
2E0DYP
- 21 Oct 2016, 06:21
- Forum: User Support
- Topic: Log40M CAT - Hamlib - Omnirig
- Replies: 4
- Views: 3044
Re: Log40M CAT - Hamlib - Omnirig
Thamks Terry, I have just had a look at the log and this is what Hamlib is doing conf=stop_bits=2,dtr_state=ON,rts_state=ON --ptt-file=COM3 --ptt-type=RIG -v 2016-10-21 06:18:23.2414 INFO: HamlibManagement: CAT HAMLIB POLLING START REQUEST (50 ms delay) 2016-10-21 06:18:23.2904 INFO: HamlibManagemen...
- 21 Oct 2016, 05:19
- Forum: User Support
- Topic: Log40M CAT - Hamlib - Omnirig
- Replies: 4
- Views: 3044
Log40M CAT - Hamlib - Omnirig
I would just like to start with a BIG Thanks to all at Log40m for making this fantastic software. I am a big user of this and have been using it for 2 years. The problem I have is with a FT-747GX and CAT control so that I can click on the spots and automatically change frequency. If I can get this w...
- 16 Jul 2016, 13:19
- Forum: User Support
- Topic: CAT control with Yaesu FT-747GX
- Replies: 1
- Views: 2832
CAT control with Yaesu FT-747GX
Hi Guy's First can I thank you for this wonderful piece of software that I have been using for over 1 year now! Its mega!! The only thing I would LOVE to get working is the CAT control with my Yaesu FT747. I know it's a old radio but I have been trying to get it working with Hamlib and Omni rig with...