Log4OM

dk2lo

Here LOG4OM V2.14.1 and Microham CW-Keyer (Winkeyer opened successfully: Hardware Version 10) Winkeyer functions work but the paddle input is not working correctly - erratic behaviour, e. g. dit paddle results sometimes only in one dit. Therefore the use of the paddle is impossible. Using the same H...

dk2lo

This morning I made a totally new installation incl. Omnirig. Before I renamed the appdata/roaming/log4om folder as adviced to start with the default config files. Unfortunately exactly the same misbehaviour as described. I give up now. Perhaps a new release will solve this mystery. Nolan and Terry,...

dk2lo

Nolan, I am always shy to "destroy" my running DX-machine environment though the chance for a new DXCC bandpoint is currently pretty low. I tried something else. I have a second rig which worked perfect with LOG4OM V1 as rig2. This is a mcHF which I have build from a kit from M0NKA. This g...

dk2lo

Nolan, yes I use for communication two cables to the K3s: 1. USB-cable from the K3s USB-port to the PC - only to use the internal soundcard (KIO3B) for digital modes. Shows up as "USB Audio CODEC" in device manager (audio) 2. Serial cable from the RS232/P3 port of the K3s via the P3 to the...

dk2lo

Nolan, yes I also suspected my P3. Currently I use the E980297 cable and the Serial line is routed through the P3 as described on page 19 of the K3s owners manual. I do not own the CBLP3Y cable as described on page 18. Therefore I cannot set CONFIG:RS232 to USB with my cable. This would disconnect t...

dk2lo

Terry, yes I believe you. I tried also different cables. It seems that I only have this mysterious behaviour. Something must be wrong in my configuration. Fortunately I can easily sail around this problem by using the bandmap or the cluster view. I will report here when I have solved this strange is...

dk2lo

Nolan, thanks for reply. I use a K3s with the USB-connection for digital modes and the serial port for CAT. I tried already different CAT connections. Direct via RS232 port at my desktop and via USB to serial converter. The problem only occurs in the "F8 window" and when mode is not change...

dk2lo

Tried "send mode before freq" Stopped also all other programs including Internet browser Omnirig and LOG4OM "Run as admin" I only use standard Defender security. I never switch it off when in the Internet... Still the same problem. It ONLY occurs when mode is NOT changed! A real ...

dk2lo

Hi Terry,

yes I am on the latest K3 firmware 5.67. My configuration looks very similar as yours:

: LOG4ON-CAT.jpg (100.5 KiB) Viewed 3457 times

dk2lo

Was in User Support: "Strange CAT behaviour with K3s" Environment: LOG4OM V11.0.0 Omnirig 1.19 Windows 10 pro 64 bit Error: Double click in Cluster (F8) does not change Frequency when mode is the same. Works perfect in Bandmap and works also in separate Cluster View Window opened via View ...

Search found 119 matches

Winkeyer Paddle not working correctly

Re: V2.11.0.0 double-click on Cluster (F8) not working

Re: V2.11.0.0 double-click on Cluster (F8) not working

Re: V2.11.0.0 double-click on Cluster (F8) not working

Re: V2.11.0.0 double-click on Cluster (F8) not working

Re: V2.11.0.0 double-click on Cluster (F8) not working

Re: V2.11.0.0 double-click on Cluster (F8) not working

Re: V2.11.0.0 double-click on Cluster (F8) not working

Re: V2.11.0.0 double-click on Cluster (F8) not working

V2.11.0.0 double-click on Cluster (F8) not working