Auto fill of Azimuth

Your ideas for making Log4OM even better.
dmalcolm
Advanced Class
Posts: 49
Joined: 03 Nov 2015, 13:31

Auto fill of Azimuth

Post by dmalcolm » 25 Jan 2017, 15:32

I would like to see the Antenna Azimuth field auto filled. I run WSJT-X & JTAlert-X and I believe that information is available via ADIF. I understand some users would prefer no auto fill of this field. But could we get a settings option to either auto fill or not?
Dan Malcolm
K4SHQ

User avatar
G4POP
Moderator
Posts: 5704
Joined: 21 Jan 2013, 14:55
Location: Burnham on Crouch, Essex UK

Re: Auto fill of Azimuth

Post by G4POP » 25 Jan 2017, 16:08

Depends if the azimuth information is exported by the JT65 programs and pushed into the Log4OM SQLite database by JTAlert.

I don't use JT modes so cant check what information those programs provide unless someone sends me the exported data
73 Terry G4POP

dmalcolm
Advanced Class
Posts: 49
Joined: 03 Nov 2015, 13:31

Re: Auto fill of Azimuth

Post by dmalcolm » 25 Jan 2017, 18:19

The best I can tell, azimuth is not supplied from either WSJT-X or JTAlert-X. It is however provided when I get a lookup on QRZ. I am not sure what you supply to QRZ for a lookup, nor do I know what they send back..
Dan Malcolm
K4SHQ

dmalcolm
Advanced Class
Posts: 49
Joined: 03 Nov 2015, 13:31

Re: Auto fill of Azimuth

Post by dmalcolm » 25 Jan 2017, 18:29

I looked up the QRZ query requirements and response fields. Azimuth is not obtainable from that source.
Dan Malcolm
K4SHQ

User avatar
W7DRM
Log4OM Alpha Team
Posts: 570
Joined: 19 Feb 2014, 19:44

Re: Auto fill of Azimuth

Post by W7DRM » 25 Jan 2017, 20:20

Dan,

A work around is to open QSO Manager/Archive, select the JT65 qso's you would like to update by setting a filter - Mode=JT65. Then select all or part of the results, then click on Field Update in the top set of options. In the resulting dialog box, in the lower portion, check the "Update qso distance/bearing" checkbox. Then click Execute checks. You should then have good Antenna Azimuth calculated based on the gird of the contact and your gird.

I hope this helps.

Doug - W7DRM

dmalcolm
Advanced Class
Posts: 49
Joined: 03 Nov 2015, 13:31

Re: Auto fill of Azimuth

Post by dmalcolm » 25 Jan 2017, 22:35

Thanks Doug. That's how I mass updated all of my imported QSO's. It's easy enough to fill in by hand as the QSO's are logged, but it would be even easier if it was automatic.
Thanks again.
Dan Malcolm
K4SHQ

User avatar
W7DRM
Log4OM Alpha Team
Posts: 570
Joined: 19 Feb 2014, 19:44

Re: Auto fill of Azimuth

Post by W7DRM » 26 Jan 2017, 00:37

Dan,

Because JTAlert writes the QSO to the Log4OM database file directly, It might not be that easy for Log4OM to do any post addition processing. What would trigger Log4OM to take action? It would be much easier to calculate that info in JTAlert prior to the log addition. Have you talked to the JTAlert author about this?

Doug - W7DRM

dmalcolm
Advanced Class
Posts: 49
Joined: 03 Nov 2015, 13:31

Re: Auto fill of Azimuth

Post by dmalcolm » 26 Jan 2017, 03:06

I have not, but I will. I had just gotten used to my last ham log doing it for me.
Dan Malcolm
K4SHQ

dmalcolm
Advanced Class
Posts: 49
Joined: 03 Nov 2015, 13:31

Re: Auto fill of Azimuth

Post by dmalcolm » 27 Jan 2017, 19:50

Problem solved. Thanks.
Dan Malcolm
K4SHQ

User avatar
G4POP
Moderator
Posts: 5704
Joined: 21 Jan 2013, 14:55
Location: Burnham on Crouch, Essex UK

Re: Auto fill of Azimuth

Post by G4POP » 28 Jan 2017, 00:16

Er! How?
73 Terry G4POP

Post Reply