Label Print
Posted: 23 Jul 2018, 08:26
Is there a way of getting the 'QSO Selection' tab in <Label Print> to show ALL QSOs in the log?
I have just taken over as QSL manager for our local club. We have 9 club callsigns which members have used in the past and we have roughly 10 members that have used one or more of the callsigns.
Their logs were submitted to ClubLog by the previous manager individually under the club callsign used.
I have obtained a log for each club callsign from ClubLog and need to print out labels for contacts as necessary. However when using the <Label Print> facility I can only get a partial listing of contacts dependent upon the individual callsign of the member who was using the club callsign.
For instance I have one log with over 10,000 QSOs, but when I go to the <Label Print> 'QSO Selection' page and choose the blank where it says "Station Callsign" - I only get a list of 2,100 QSOs. If I choose one of the members individual callsigns from the drop-down list I obviously get varying smaller totals of QSOs showing, but none will show all 10,000+
If I filter by date or any of the other options, the most it will display is the 2,100.
Some Contacts have multiple QSOs with one club callsign on different bands - but with different operators, even on the same day - so at present I have to wade through all 10 individual callsign 'logs' to confirm contacts - one after the other - and then each one has to be printed out on an individual label.
What I need is to be able to display all 10,000+ QSOs on this page so I can sort and check against the 100+ QSO cards I have received through the Bureau, all in one pass.
Hope that makes sense.
I have just taken over as QSL manager for our local club. We have 9 club callsigns which members have used in the past and we have roughly 10 members that have used one or more of the callsigns.
Their logs were submitted to ClubLog by the previous manager individually under the club callsign used.
I have obtained a log for each club callsign from ClubLog and need to print out labels for contacts as necessary. However when using the <Label Print> facility I can only get a partial listing of contacts dependent upon the individual callsign of the member who was using the club callsign.
For instance I have one log with over 10,000 QSOs, but when I go to the <Label Print> 'QSO Selection' page and choose the blank where it says "Station Callsign" - I only get a list of 2,100 QSOs. If I choose one of the members individual callsigns from the drop-down list I obviously get varying smaller totals of QSOs showing, but none will show all 10,000+
If I filter by date or any of the other options, the most it will display is the 2,100.
Some Contacts have multiple QSOs with one club callsign on different bands - but with different operators, even on the same day - so at present I have to wade through all 10 individual callsign 'logs' to confirm contacts - one after the other - and then each one has to be printed out on an individual label.
What I need is to be able to display all 10,000+ QSOs on this page so I can sort and check against the 100+ QSO cards I have received through the Bureau, all in one pass.
Hope that makes sense.