Support for Transverters

Your ideas for making Log4OM even better.
Post Reply
VK2XAX
Novice Class
Posts: 8
Joined: 28 Feb 2019, 22:49

Support for Transverters

Post by VK2XAX » 28 Feb 2019, 23:20

G'Day,
I'd like to see support for transverters added with both the transverters frequency and the driver radio's frequency displayed on the top bar.

Maybe an an array with radio buttons where each button represents an offset so that you can switch between 13,9,6 and 3cm or more, with a single click under the transverter frequency display.

Maybe even double-click the transverter display to set the current offset and band.

I use my FT817 almost exclusively for SHF transverters and it would be nice to have Log4OM log the frequency as 2403.1Mhz rather than the dial frequency of the FT817.

thanks

Tim
VK2XAX :: QF56if :: BMARC :: WIA :: AMSAT-VK

User avatar
DF5WW
Log4OM Alpha Team
Posts: 1041
Joined: 02 May 2013, 09:49
Location: Kraam, Rhineland Palatinate, Germany
Contact:

Re: Support for Transverters

Post by DF5WW » 01 Mar 2019, 05:17

Hello Tim,

you can use the Transverter Offset in Settings/Cat & Cluster to let Log4OM show the correct
Frequency.

;) ;)
73´s .. Juergen ... RedPitaya SDR 5 W, 20 mtr. indoor wireloop feeded with homemade ladderline (600 Ohms) ...

VK2XAX
Novice Class
Posts: 8
Joined: 28 Feb 2019, 22:49

Re: Support for Transverters

Post by VK2XAX » 04 Mar 2019, 06:30

Hi Juergen,

I cant seem to make that work and it appears that it might be only for the currently active radio.

That being said , there needs to be a way to tell LOG4OM that you only want an offset on a nominated rig.

I still need multiple offset ability for my transverters all the way to 24Ghz. :)

regards

Tim
VK2XAX :: QF56if :: BMARC :: WIA :: AMSAT-VK

Post Reply