Non si riesce ad interfacciare con Kenwood TS-590SG

IK3SSG
Novice Class
Posts: 5
Joined: 07 Jun 2016, 15:57
Location: jn55xh
Contact:

Non si riesce ad interfacciare con Kenwood TS-590SG

Post by IK3SSG »

Buona sera e grazie per aver scelto questo messaggio.

Ho cambiato radio, sono passato da un TS440S a un TS590SG.
Prima non avevo alcun problema a vedere le due frequenze dei VFO in alto a DX e naturalmente cliccando sulla stazione indicata nel cluster, mi sintonizzavo automaticamente sulla frequenza giusta.
Adesso non funziona più.
È vero, questo RTX viene comandato via USB e non via RS232...ma, con un apposito driver indicato dal costruttore, ho creato una porta Com virtuale.
Con questa sia il software dedicato e anche JST-X comunicano correttamente con la radio.
Con Log4Om non riesco a vedere e comandare nulla.
Ho provato a disistallare Omnirig, ma niente da fare...
Qualche utilizzatore di Log4OM ha questo RTX mi da qualche dritta ?
Grazie mille
73
:)
Graziano
User avatar
DF5WW
Log4OM Alpha Team
Posts: 2031
Joined: 02 May 2013, 09:49
Location: Kraam, Rhineland Palatinate, Germany
Contact:

Re: Non si riesce ad interfacciare con Kenwood TS-590SG

Post by DF5WW »

Ciao Garaziano,

vedo che avete cambiato il TRX e ora usate una porta COM virtuale con un TS-590SG. Come si scrive tutto funziona bene con WSJT-X, ma non viene più visualizzato nulla nel Log4OM?

Penso che si debba impostare Omnirig sul nuovo TRX e sulla porta COM virtuale. Il Log4OM deve essere avviato prima per poter accedere anche al Log4OM.
Controllo CAT. In WSJT-X e JTDX è necessario impostare il TRX su Omnirig. Poi entrambi i programmi hanno accesso al CAT.

Installare anche l' ultima versione di Omnirig.

Spero che il mio italiano non fosse così male. Tradotto con il traduttore DeepL.

73 Juergen, DF5WWW

Tradotto con www.DeepL.com/Translator
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
IK3SSG
Novice Class
Posts: 5
Joined: 07 Jun 2016, 15:57
Location: jn55xh
Contact:

Re: Non si riesce ad interfacciare con Kenwood TS-590SG

Post by IK3SSG »

Ciao Juergen, e grazie per la risposta.
Ho giá provato a cambiare i parametri del RTX e della porta Virtuale.
Purtroppo non ho avuto successo.
Ho nuovamente installato l'ultima versione di Omnirig ma non si interfaccia con Log4Om.
Non capisco dove sbaglio....

Grazie comunque.
73
Graziano IK3SSG

Hallo Jürgen, und danke für die Antwort.
Ich habe bereits versucht, die Parameter des RTX und des virtuellen Ports zu ändern.
Leider ist mir das nicht gelungen.
Ich habe die neueste Version von Omnirig neu installiert, es funktioniert jedoch nicht mit Log4Om.
Ich verstehe nicht, wo ich falsch liege ....

Danke trotzdem.
73
Graziano IK3SSG
User avatar
G4POP
Log4OM Alpha Team
Posts: 10749
Joined: 21 Jan 2013, 14:55
Location: Burnham on Crouch, Essex UK

Re: Non si riesce ad interfacciare con Kenwood TS-590SG

Post by G4POP »

Never ever post your logfiles to a forum because your logfile can contain sensitive information like passwords - I have deleted both posts.

I can however detect that your issue is because YOU ARE NOT RUNNING LOG4OM AS AN ADMINISTRATOR - Please refer tour user guide and also quick start video

Mai mai inviare i file di log a un forum perché il file di log può contenere informazioni sensibili come le password-ho cancellato entrambi i post.

Posso tuttavia rilevare che il problema è perché non si esegue log4OM come amministratore-si prega di consultare Guida per l'utente tour e anche Quick Start video
73 Terry G4POP
IK3SSG
Novice Class
Posts: 5
Joined: 07 Jun 2016, 15:57
Location: jn55xh
Contact:

Re: Non si riesce ad interfacciare con Kenwood TS-590SG

Post by IK3SSG »

oh ! :o
Thank you for info and help...
I'm Administrator of my PC...
I'll try other test.
73s
Graziano
User avatar
DF5WW
Log4OM Alpha Team
Posts: 2031
Joined: 02 May 2013, 09:49
Location: Kraam, Rhineland Palatinate, Germany
Contact:

Re: Non si riesce ad interfacciare con Kenwood TS-590SG

Post by DF5WW »

Hi Graziano,

what Terry means is that Log4OM must be installed with adminitrator privileges or
you can go to the Log4OM shortcut on your desktop (or to logOMUI.exe in your Log4OM
folder), if using right mousekey you get a popup. Under compatibility you can set "Run as Administrator".
After saving this Log4OM will always start with the correct privileges.

This has nothing to do with that you are the administrator of your PC ;) ;)
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
User avatar
G4POP
Log4OM Alpha Team
Posts: 10749
Joined: 21 Jan 2013, 14:55
Location: Burnham on Crouch, Essex UK

Re: Non si riesce ad interfacciare con Kenwood TS-590SG

Post by G4POP »

I sometimes wonder why I wrote the user guide and quick start manuals! This is clearly covered in the user guide and the Quick start Guide as below:


Capture.JPG
Capture.JPG (52.37 KiB) Viewed 7768 times


Also by the YouTube Video Tutorial Log4OM Quick Start Guide
73 Terry G4POP
K7PT
Old Man
Posts: 723
Joined: 21 Jan 2013, 13:54

Re: Non si riesce ad interfacciare con Kenwood TS-590SG

Post by K7PT »

Terry,
I would suggest that you amend the manual to read "Install with Admin Privileges" instead of as "Admin" along with a screen shot of the drop down as they are two completely separate things.

Just a suggestion as it confuses some.
K7PT-Chuck "#1 Top of the Honor Roll"
User avatar
G4POP
Log4OM Alpha Team
Posts: 10749
Joined: 21 Jan 2013, 14:55
Location: Burnham on Crouch, Essex UK

Re: Non si riesce ad interfacciare con Kenwood TS-590SG

Post by G4POP »

K7PT wrote: 21 Jan 2018, 14:37 Terry,
I would suggest that you amend the manual to read "Install with Admin Privileges" instead of as "Admin" along with a screen shot of the drop down as they are two completely separate things.

Just a suggestion as it confuses some.

I have just re-written the user guide and Quick start guide and uploaded them to the website as below, Users will need to download the user guide in the Log4OM 'HELP' menu for these changes to be displayed.

Hopefully this will avoid any further misunderstanding's! :roll:


USER GUIDE


Capture.JPG
Capture.JPG (53.22 KiB) Viewed 7762 times

QUICK START GUIDE

Quick start.JPG
Quick start.JPG (53.91 KiB) Viewed 7762 times
73 Terry G4POP
K7PT
Old Man
Posts: 723
Joined: 21 Jan 2013, 13:54

Re: Non si riesce ad interfacciare con Kenwood TS-590SG

Post by K7PT »

If someone can't understand the latest edition, I don't know what to tell them.
K7PT-Chuck "#1 Top of the Honor Roll"
Locked