Statistics (F1): What does red [QSL] mean?
Statistics (F1): What does red [QSL] mean?
I've worked Bulgaia on 20m CW. Lotw received. QSL Sent is requested.
Mike/KA4CDN
- G4POP
- Log4OM Alpha Team
- Posts: 10803
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Statistics (F1): What does red [QSL] mean?
But you have not received a paper QSL thats why the 'QSL' button is red
73 Terry G4POP
- DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: Statistics (F1): What does red [QSL] mean?
That´s what it means. QSL means a paper card, since hams sending cards as "the final courtesy" of a QSO.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
Re: Statistics (F1): What does red [QSL] mean?
Then what is Orange?
- DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: Statistics (F1): What does red [QSL] mean?
Do me a favour, RTFM ... Means unconfirmed. Check out your QSL send status for this and i´m shure
you have QSL send set to "YES" but you havn´t received one. So it´s worked but unconfirmed. In
the example you have it red QSL send was set to "Requested". As it set so the QSL isn´t send and in
that case it´s unworked. Try to set to "YES" and it will change the color i think. If not you may report
a new issue.
you have QSL send set to "YES" but you havn´t received one. So it´s worked but unconfirmed. In
the example you have it red QSL send was set to "Requested". As it set so the QSL isn´t send and in
that case it´s unworked. Try to set to "YES" and it will change the color i think. If not you may report
a new issue.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
- G4POP
- Log4OM Alpha Team
- Posts: 10803
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Statistics (F1): What does red [QSL] mean?
Means you dont have the COUNTRY confirmed ELECTRONICALLY (EQSL or LOTW) on that BAND
73 Terry G4POP
Re: Statistics (F1): What does red [QSL] mean?
Would you kindly point is to the proper spot in the manual?
73,
Rich
KD0ZV
Log4OM Alpha Team
Rich
KD0ZV
Log4OM Alpha Team
Re: Statistics (F1): What does red [QSL] mean?
I assure you I down load and review the latest user manual every time before asking a question. This s/w is amazing and very flexible. I do not envy the documentation team. As a s/w developer myself, I know the challenges!Do me a favour, RTFM ... Means unconfirmed. Check out your QSL send status for this and i´m shure
you have QSL send set to "YES" but you havn´t received one. So it´s worked but unconfirmed. In
the example you have it red QSL send was set to "Requested". As it set so the QSL isn´t send and in
that case it´s unworked. Try to set to "YES" and it will change the color i think. If not you may report
a new issue.
Your paragraph, minus the the read the manual, should be inserted into the manual. It is clear to me as to now how it is suppose to work. Thank you. As of now, there is nothing in the manual indicating that the received statuses (QSL, EQSL or LOTW) in the Statistics are contingent on sent statuses.
Now that you've explain how it is suppose to work I still think something is not right. Beloiw, here I have Poland, 30m CW selected: Country QSL is RED. Fine and correct. I have three (3) Qsl Sent QSOs set to Requested.
Band is RED. WHY? I only have one (1) 30m QSO with Poland and Qsl Sent is No.
Mode is RED. WHY? I have four (4) CW QSOs with Poland and all have Qsl Sent set to No.
Mike
- DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: Statistics (F1): What does red [QSL] mean?
Have you restarted after this changes and tried again ?
By the way. If you have checked QSLsend to "NO" for those contacts its unworked/unconfirmed and it
will be show´n in RED COLOR. SET QSL SEND TO "yes" and i think the colour will change to
"YELLOW".
By the way. If you have checked QSLsend to "NO" for those contacts its unworked/unconfirmed and it
will be show´n in RED COLOR. SET QSL SEND TO "yes" and i think the colour will change to
"YELLOW".
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
Re: Statistics (F1): What does red [QSL] mean?
Well I've not changed anything so saw no reason to restart. But as a test I shut down and restarted. No change. I have RED for [QSL] Country (correct), Band (wrong I think) and Mode (wrong I think).
If I send a QSL to someone and do not ask for a card, I do not expect to get one. If I request a card, regardless of if I sent one, the QSL Receive status should be Requested.
Mike
I give up. Now I am more confused. It makes no sense that the received status should be on the Sent status.By the way. If you have checked QSLsend to "NO" for those contacts its unworked/unconfirmed and it
will be show´n in RED COLOR. SET QSL SEND TO "yes" and i think the colour will change to
"YELLOW".
If I send a QSL to someone and do not ask for a card, I do not expect to get one. If I request a card, regardless of if I sent one, the QSL Receive status should be Requested.
Mike
Last edited by KA4CDN on 21 Feb 2020, 20:14, edited 2 times in total.