Icom IC 7300 now goes into RTTY-D on FT8?
Posted: 13 Aug 2020, 10:25
Hello again, I have no more hair to pull out with frustration regarding Log4OM 2 & WSJT-x Program. I have at last got both programs to load & run together.
Following advice from forum I run all programs with full Admin Authority.
This gets the programs to start up and actually run together.
But now another problem has happened when transmitting WSJT-X in FT8 Mode.
The ICOM IC 7300 goes into RTTY-D mode when its set to USB-D for FT8.
The log4om 2 window states that it has switched to 20m USB see Jpeg. & not FT8 USB.
So now the only way I can use LOG4OM 2 is to run WSJT-X as a stand alone program, then upload this log at the end of days QSO`s working into LOG4OM2 this then gives me my FT8 logs in LOG4OM V2 program.
It has beaten me totaly why I cannot run them together like they once did in version 1 of log4om.
I appreciate the help you guys are giving me but it seems I get over one problem and another gremlin appears. Hi But if I keep at it betreen us I am sure one day Log4OM 2 & WSJT-x Program will run perfectly with my IC7300 as loads of radio hams run theirs OK but mine will not. Maybe its the computer.
Any further help very much appreciated as I am down & out 73
Glyn GW0ANA
Capture Files
https://forum.log4om.com/download/file. ... ew&id=3919
https://forum.log4om.com/download/file. ... ew&id=3920
https://forum.log4om.com/download/file. ... ew&id=3921
Unable to communicate with the WSJT-X process.
UDP Port : 2237
IP Address : 127.0.0.1
Values read from WSJT-X config file...
C:\Users\Admin\AppData\Local\WSJT-X\WSJT-X.ini
WSJT-X Detected Instance...
Process Window Title : WSJT-X v2.2.2 by K1JT, G4WJS, and K9AN
Process Command Line : "C:\WSJT\wsjtx\bin\wsjtx.exe"
Decode alerts and logging will be unavailable until corrected.
Following advice from forum I run all programs with full Admin Authority.
This gets the programs to start up and actually run together.
But now another problem has happened when transmitting WSJT-X in FT8 Mode.
The ICOM IC 7300 goes into RTTY-D mode when its set to USB-D for FT8.
The log4om 2 window states that it has switched to 20m USB see Jpeg. & not FT8 USB.
So now the only way I can use LOG4OM 2 is to run WSJT-X as a stand alone program, then upload this log at the end of days QSO`s working into LOG4OM2 this then gives me my FT8 logs in LOG4OM V2 program.
It has beaten me totaly why I cannot run them together like they once did in version 1 of log4om.
I appreciate the help you guys are giving me but it seems I get over one problem and another gremlin appears. Hi But if I keep at it betreen us I am sure one day Log4OM 2 & WSJT-x Program will run perfectly with my IC7300 as loads of radio hams run theirs OK but mine will not. Maybe its the computer.
Any further help very much appreciated as I am down & out 73
Glyn GW0ANA
Capture Files
https://forum.log4om.com/download/file. ... ew&id=3919
https://forum.log4om.com/download/file. ... ew&id=3920
https://forum.log4om.com/download/file. ... ew&id=3921
Unable to communicate with the WSJT-X process.
UDP Port : 2237
IP Address : 127.0.0.1
Values read from WSJT-X config file...
C:\Users\Admin\AppData\Local\WSJT-X\WSJT-X.ini
WSJT-X Detected Instance...
Process Window Title : WSJT-X v2.2.2 by K1JT, G4WJS, and K9AN
Process Command Line : "C:\WSJT\wsjtx\bin\wsjtx.exe"
Decode alerts and logging will be unavailable until corrected.