How do I keep Omnirig from turning Ci-V transceive off.

Post Reply
w7rms
Novice Class
Posts: 4
Joined: 27 Oct 2020, 21:37

How do I keep Omnirig from turning Ci-V transceive off.

Post by w7rms »

My Acom 700S amp needs Ci-V transceive on to get band data from my Icom 7300 but it is turned off every time I start log4om. Is there a way to prevent this?
User avatar
G4POP
Log4OM Alpha Team
Posts: 10752
Joined: 21 Jan 2013, 14:55
Location: Burnham on Crouch, Essex UK

Re: How do I keep Omnirig from turning Ci-V transceive off.

Post by G4POP »

w7rms wrote: 27 Oct 2020, 22:12 My Acom 700S amp needs Ci-V transceive on to get band data from my Icom 7300 but it is turned off every time I start log4om. Is there a way to prevent this?
I think if you look at the 7300 omnirig ini file you will see the command turning it off is in there and you can edit the commands yourself.

However I beleive that it is necessary for it to be off for CAT control?

Cant you use the ATU or ACC sockets to connect to your amp?
73 Terry G4POP
w7rms
Novice Class
Posts: 4
Joined: 27 Oct 2020, 21:37

Re: How do I keep Omnirig from turning Ci-V transceive off.

Post by w7rms »

Commenting out that setting in the .rig file fixed the problem. The REMOTE port is used to talk to the amp. You have to set CI-V USB Port > Unlink from [Remote] so that both the remote port and the USB port can be used independently and CI-V Transceive needs to be on.

All is good now. Thanks.
LZ2FP
New user
Posts: 1
Joined: 11 Jan 2022, 09:23

Re: How do I keep Omnirig from turning Ci-V transceive off.

Post by LZ2FP »

Hi!
The same was situation for me. On ICOM 7300 default settings for CI-V Transceive is ON. It is nesessary for working communication via remote port. In my situation EVERY software, using Omni Rig stops my amplifier to communicate with the radio. I think, this has to be corrected by Omni rig autor. Now my Omni turns CI-V Transceive in On by this changes in IC 7300 ini file in C\Program files (x86)\Afreet\OmniRig\Rigs

[INIT2]
;Turn CI-V transceive ON
Command=FEFE94E0.1A050071.01.FD
ReplyLength=16
Validate=FEFE94E01A05007101FD.FEFEE094FBFD
PY5CV
Novice Class
Posts: 4
Joined: 17 Jul 2022, 15:33

Re: How do I keep Omnirig from turning Ci-V transceive off.

Post by PY5CV »

GREAT !!!

Thank you LZ2FP for the solution that bothered me. I use the CI-V ON (IC-7300) to automate my Antennas by Frequency and it was constantly OFF and I didn't know what it was.

Thank you very much

73´s PY5CV Brazil
Post Reply