Icom IC-7300 driver issue

Post Reply
G4AON
Old Man
Posts: 100
Joined: 15 Oct 2015, 21:19

Icom IC-7300 driver issue

Post by G4AON »

Having previously used my spare radio, an IC-7300, with Log4OM on both a Windows 10 desktop and a Windows 10 laptop, it was frustrating to find it didn’t communicate via USB to either computer.

An IC-9700 worked fine with Log4OM under Omnirig on the desktop.

Neither Log4OM, nor Minos, would talk to the 7300 using either Hamlib or Omnirig on the desktop PC, but Minos with Hamlib worked on the laptop!

The problem was solved by deleting the Icom USB driver and re-installing it. The versions looked the same and were dated 2018.

I know this problem has been covered on here before, but I don’t think removing and re-installing the Icom USB driver was mentioned as a fix.

73 Dave
User avatar
KI5IO
Log4OM Alpha Team
Posts: 1798
Joined: 16 Aug 2015, 16:30
Location: Plano, TX

Re: Icom IC-7300 driver issue

Post by KI5IO »

Dave,

Tnx for input and additional food for thought.

Every time I see a post about communications to/from an Icom rig I almost shudder as it is often always related to the Icom driver(s) in some fashion or another.

I don't have an Icom so can't speak directly to experience with same, but watching the quite often recurring posts about those driver issues has me shaking my head wondering about the Icom driver programming.
73 - Nolan Kienitz - KI5IO
Plano, TX
Post Reply