Page 1 of 1
Shutdown error
Posted: 05 Jun 2020, 20:00
by VK4FI
Good Morning,
I have been running V2 for a few weeks now and have been having the attached error when closing the program. It just sits at this screen and will not progress.
I am using the program with a Yaesu FT-991-A and using Omni-rig, using version 2.6.1.0
Any assistance or ideas would be great,
thanks
de
Steve - VK4FI
- Close error.png (21.33 KiB) Viewed 3606 times
Re: Shutdown error
Posted: 05 Jun 2020, 21:15
by G4POP
Have you got LOTW auto upload on closing selected or any other auto upload?
Re: Shutdown error
Posted: 06 Jun 2020, 04:56
by VK4FI
yes I have, is that the problem?
Re: Shutdown error
Posted: 06 Jun 2020, 05:27
by VK7XX
VK4FI wrote: ↑06 Jun 2020, 04:56
yes I have, is that the problem?
Its not really a problem as such Steven but, it can take a minute or three to complete the process before that close down window go's away.
John
Re: Shutdown error
Posted: 06 Jun 2020, 06:47
by G4POP
VK4FI wrote: ↑06 Jun 2020, 04:56
yes I have, is that the problem?
Sometimes the upload to LOTW can take some time because LOTW gets busy, so it depends how long the message remains on screen
If the message never disappears then disable the auto LOTW upload and see if that resolves it and let me know the outcome
Re: Shutdown error
Posted: 06 Jun 2020, 18:51
by VK4FI
Hi Terry,
I have tried it with LOTW upload on close selected and it never disappeared. I even left it for several hours.
If I turn that option off it closes correctly.
Thanks
Steve
Re: Shutdown error
Posted: 06 Jun 2020, 19:08
by G4POP
VK4FI wrote: ↑06 Jun 2020, 18:51
Hi Terry,
I have tried it with LOTW upload on close selected and it never disappeared. I even left it for several hours.
If I turn that option off it closes correctly.
Thanks
Steve
Set the log mode to Trace in the help menu
Set upload on close down for LOTW
Close the program
Reopen log4om and EMAIL ME THE LOG FILE DO NOT POST IT HERE
my email is g4pop (at) arrl.net
Re: Shutdown error
Posted: 08 Jun 2020, 18:02
by VE2ESF
Hello Terry,
It would seem that I have the same problem or a very similar one as the one presented in this post. I tried the suggested corrections but the Log4OM has still some difficulty to shut down. Thinking that upgrading from 2.6.1 to 2.7.0 would solve the problem, I've upgraded the software to no avail...
I'm a new Ham Radio operator so this is kind of new to me but I work hard to try to keep up...
PC is a Dell Inpiron 1520 with 2 Gb of RAM, Windows 7 32 bit Family version. I'm trying to setup WSJT-X, Omni-Rig, GridTracker and Log4OM 2 to work together. The rig is a Kenwood TS-590S linked to the computer by a UBS cable. To date, I have about 600 QSOs that I've made exclusively with WSJT-X and manually transferred them to QRZ, EqsL and LotW. I use the Dimension 4 software to keep the internal clock synchronized.
Could you offer some insights on what to do ?
Thank you for your precious help.
Roger
VE2ESF
Montreal, Quebec, Canada