i'm using a ft891 and if i try to send a qso report to the cluster; the box shows me the frequency of vfo 2 instead of the correct one of vfo 1
See attached image to better understand the situation
73 Roberto
IU2NUB
Sendig Spot to cluster error in frequency
Sendig Spot to cluster error in frequency
- Attachments
-
- Ritaglio.jpg (249.39 KiB) Viewed 1585 times
-
G4POP
- Log4OM Alpha Team
- Posts: 10803
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Sendig Spot to cluster error in frequency
Because you are in split mode - see your screen shot
73 Terry G4POP
Re: Sendig Spot to cluster error in frequency
Sorry Terry, but where can I disable split mode?
I don't think I've activated it anywhere
73 Roberto
IU2NUB
I don't think I've activated it anywhere
73 Roberto
IU2NUB
- Attachments
-
- Cattura.JPG (207.48 KiB) Viewed 1582 times
-
DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: Sendig Spot to cluster error in frequency
Iu2nub wrote: ↑22 Nov 2021, 20:08 No is in your program?
https://www.facebook.com/groups/log4om/ ... 373036468/
73
No it´s not in Log4OM. Log4OM don´t use an own CAT interface so it´s a problem with the Omnirig
file for your transceiver where you have to change the CAT Key´s for Split on or Split off.
The Omnirig .ini files can be editet by user with a simple and free editor like Notepad++
If you use Hamlib instead of Omnirig i have no idea it´s changeable or not. Never worked with
Hamlib.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
