Setup for the Seiko Smart Label Printer SLP-650

General discussions V2
Post Reply
User avatar
ac5ez
Novice Class
Posts: 21
Joined: 18 Jan 2017, 17:03
Location: Oak Point, TX USA

Setup for the Seiko Smart Label Printer SLP-650

Post by ac5ez »

Here are the setup values for the Seiko Smart Label Printer SLP-650 strip printer.

Page Layout Screen:
Seiko Printer-Page Layout-02.png
Seiko Printer-Page Layout-02.png (94.08 KiB) Viewed 8465 times
Label Properties Screen:
Seiko Printer-Label properties-02.png
Seiko Printer-Label properties-02.png (61.46 KiB) Viewed 8465 times

After you update the values on the screen be sure to go back to the Page layout screen and click the disc icon to save your updates.

This is how the label will look. It is not how I would like to see the label but this is how Log4OM-V2 formats it.

If you choose to have more than 3 QSO lines you will need to adjust the font sizes and the margin values to allow for more lines to print.
-
Test Label.png
Test Label.png (13.03 KiB) Viewed 8465 times
Hope this helps.
73,
Ken, AC5EZ
User avatar
DF5WW
Log4OM Alpha Team
Posts: 2031
Joined: 02 May 2013, 09:49
Location: Kraam, Rhineland Palatinate, Germany
Contact:

Re: Setup for the Seiko Smart Label Printer SLP-650

Post by DF5WW »

Your screenshots showing Log4OM V2. So will move this thread to the V2 section ... ;) ;)
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
Post Reply