I have no idea what MFSK is, but I am certain that I have never used it.
Searching in Log4OM (2.10.0.0) does not reveal any MFSK in the mode field. However, there are 420 in the exported ADIF file.
Any idea what is going on and how can this be fixed?
Mni tnx.
MFSK as mode
MFSK as mode
You've never known happiness until you're married; but by then it is too late.
Re: MFSK as mode
Hi
MFSK is the mode for FT4
FT8 is one mode but FT4 is a submode from MFSK
Normaly if you have MODE=MFSK then you have to SUBMODE=FT4
73
MFSK is the mode for FT4
FT8 is one mode but FT4 is a submode from MFSK
Normaly if you have MODE=MFSK then you have to SUBMODE=FT4
73
Dan - F6FLU
Log4OM V2.32.1.0 - Windows 11 - i9-11900K - SSD 512Go - 32 Go
FTdx101D - Hexbeam - Wired dipole 40-30M
https://F6FLU.org
Log4OM V2.32.1.0 - Windows 11 - i9-11900K - SSD 512Go - 32 Go
FTdx101D - Hexbeam - Wired dipole 40-30M
https://F6FLU.org
Re: MFSK as mode
the problem is qso partner are qsling on eqsl as mfsk, not ft4 and my log will not match it..
the logging programs need to get on the same way of handling ft4....
the logging programs need to get on the same way of handling ft4....
-
DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: MFSK as mode
That´s a problem with the log of your QSO partner. Log4OM handles this correct. If you have correct
FT4 contacts at eQSL it show´s MFSK (FT4) at the eQSL page. All this contacts are matching. These
which are uploaded as MFSK only (from your qso partners) did not match but we can´t do anything
about this problem.
FT4 contacts at eQSL it show´s MFSK (FT4) at the eQSL page. All this contacts are matching. These
which are uploaded as MFSK only (from your qso partners) did not match but we can´t do anything
about this problem.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
