Hello,
I just started using Log4OM and I REALLY like it so far. When I edit a QSO is seems to forget the Band and Rx Band of the QSO and won't let me save the edits until I reenter the Band info. For example in the attached screenshot I edited the QSO and added "Test notes!" to the note filed. When I went to save it I got the error in red "QSO not saved. Check Band/Mode/Callsign/Date". I then had to add the Band and Rx Band back in before I could save it. This happens every time I edit a QSO. Is this a bug or am I doing something wrong? Thank you.
QSO not Saved. Check Band/Mode/Callsign/Date Error
- G4POP
- Log4OM Alpha Team
- Posts: 10815
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: QSO not Saved. Check Band/Mode/Callsign/Date Error
Please update log4om
Your entering frequency wrong should be 21345 in first box
Do you have cat control connected
Your entering frequency wrong should be 21345 in first box
Do you have cat control connected
73 Terry G4POP
Re: QSO not Saved. Check Band/Mode/Callsign/Date Error
Ah yes!!! That was the problem. I misunderstood how to enter the frequency. I was entering the KHz and Hz in separate boxes. Once I entered it all in the KHz box as you suggested it works great. Thank you.
- DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: QSO not Saved. Check Band/Mode/Callsign/Date Error
There a no Hz in a kHz part. The frequency must me set in kHz and 21,272 MHz is 21272 kHz without the comma.
The HZ is if your TX shows 21272,100 kHz or equivalent.
The HZ is if your TX shows 21272,100 kHz or equivalent.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.