I tried to add a KX3 to work as rig2 in Omnirig. Tried it with VSPE and got the KX3's rig control working but lost the TS-590. I carefully put everything back the way it was even without VSPE checked the buadrate match and I do not have any rig control for the either radio. Can someone please help?
73, de Lee Ve4DXR
Lost rig control
- G4POP
- Log4OM Alpha Team
- Posts: 10815
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Lost rig control
Why are you using a VSP when Omnirig will control two radios without using VSP?
Problem has to be one of the following
1. Mismatch of com port or baud rate
2. Port already being used by another program, perhaps the VSP
3. The port numbers have changes probably because you plugged a usb cable into a different port
4. A usb hub is inadequate
Problem has to be one of the following
1. Mismatch of com port or baud rate
2. Port already being used by another program, perhaps the VSP
3. The port numbers have changes probably because you plugged a usb cable into a different port
4. A usb hub is inadequate
73 Terry G4POP
Re: Lost rig control
Terry,
By unplugging the TS590's usb and reinserting it I have RigControl working on Com3 for the 590. When I connect the KX3's USB to the PC on a free USB outlet I get a message that the comport is in use and I loose rigcontrol yet the Device manager says the kx3 is on port 7. How do I add the 2nd rig? 73 Lee, Ve4dxr
By unplugging the TS590's usb and reinserting it I have RigControl working on Com3 for the 590. When I connect the KX3's USB to the PC on a free USB outlet I get a message that the comport is in use and I loose rigcontrol yet the Device manager says the kx3 is on port 7. How do I add the 2nd rig? 73 Lee, Ve4dxr
Re: Lost rig control
Hi Terry,
the ts590 is at 57600 baud. The Kx3 only goes up to 38400 baud. Do they have to be the same for OmniRig to work or can each rig# have a different buad rate? Lee
the ts590 is at 57600 baud. The Kx3 only goes up to 38400 baud. Do they have to be the same for OmniRig to work or can each rig# have a different buad rate? Lee
- G4POP
- Log4OM Alpha Team
- Posts: 10815
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Lost rig control
You must have another program running that is using port 7VE4DXR wrote:Terry,
By unplugging the TS590's usb and reinserting it I have RigControl working on Com3 for the 590. When I connect the KX3's USB to the PC on a free USB outlet I get a message that the comport is in use and I loose rigcontrol yet the Device manager says the kx3 is on port 7. How do I add the 2nd rig? 73 Lee, Ve4dxr
73 Terry G4POP
- G4POP
- Log4OM Alpha Team
- Posts: 10815
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Lost rig control
Omnirig does not care what baud rate you use it on see my set ups below, however if your using the TS590 with a direct USB connection I suggest you reduce the Kenwood baud rate to 19200 because the Kenwood USB drivers are not to goodVE4DXR wrote:Hi Terry,
the ts590 is at 57600 baud. The Kx3 only goes up to 38400 baud. Do they have to be the same for OmniRig to work or can each rig# have a different buad rate? Lee
73 Terry G4POP
Re: Lost rig control
Hi Terry,
My Device Manager does not show the KX3 on any port. There must be something in the kx3 menu that needs to be turned on. Any suggestions? I will post it on KX3 Yahoo Group as well. 73, Lee VE4DXR
My Device Manager does not show the KX3 on any port. There must be something in the kx3 menu that needs to be turned on. Any suggestions? I will post it on KX3 Yahoo Group as well. 73, Lee VE4DXR
- G4POP
- Log4OM Alpha Team
- Posts: 10815
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Lost rig control
The com port may not be labelled with the radio name "K3" in fact they rarely are!VE4DXR wrote:Hi Terry,
My Device Manager does not show the KX3 on any port. There must be something in the kx3 menu that needs to be turned on. Any suggestions? I will post it on KX3 Yahoo Group as well. 73, Lee VE4DXR
The best way to find the com port number for a specific connection is to watch the device manager while you plug the radio's USB cable in and then remove it, see my example below
This is the device manager without my radio connected - NOTICE THAT THERE IS NO COM 10
Now the image below after I reconnect the radio's USB lead - COM 10 IS NOW LISTED - ERGO THE RADIO IS CONNECTED TO COM 10
73 Terry G4POP