Hi,
To my knowledge, nothing special has been done concerning the Eqsl download.
The server has been dead slow 2 weeks ago, a new index was built for the database, which made it much faster.
Besides this..........???????
I forwarded your request to the Webmaster, N5UP
73,
F6DKQ
Support Volunteer
At 15:45 19-Jan-2018 you wrote:
viewtopic.php?t=3000
According to this post the same problem was fixed by eQSL staff.
LB6B
On 19 Jan 2018, at 16:00, Ingebrigt Vibe Lunde <
ingebrigt@ingebrigt.net> wrote:
Hi again.
Trying to download the logs for only a handfull of QSO’s since wednesday gives me the following results:
19.01.2018 14.43.38: Begin ADIF generation request...
19.01.2018 14.43.38: Contacting EQSL website...
19.01.2018 14.43.38: ADIF request accepted
19.01.2018 14.43.38: Downloading ADIF document
19.01.2018 14.43.38: Contacting EQSL website (download informations)...
19.01.2018 14.43.38: ADIF document downloaded
19.01.2018 14.43.38: ADIF document parsed: 4 qso found.
19.01.2018 14.43.38: QSO updated : AA4VV 155000 20180117 20m FT8
19.01.2018 14.43.38: Contacting EQSL website for EQSL download...
19.01.2018 14.43.39: IMAGE request accepted
19.01.2018 14.43.39: Downloading IMAGE document
19.01.2018 14.43.39: IMAGE retrieved OK
19.01.2018 14.43.40: QSO updated : AB4KN 155300 20180117 20m FT8
19.01.2018 14.43.40: Contacting EQSL website for EQSL download...
19.01.2018 14.43.40: IMAGE request accepted
19.01.2018 14.43.40: NO IMAGE FOUND
More info:
http://www.eqsl.cc/qslcard/GeteQSL.cfm? ... OMinute=53
19.01.2018 14.43.40: QSO updated : KE5TD 155700 20180117 20m FT8
19.01.2018 14.43.40: Contacting EQSL website for EQSL download...
19.01.2018 14.43.40: IMAGE request accepted
19.01.2018 14.43.40: NO IMAGE FOUND
More info:
http://www.eqsl.cc/qslcard/GeteQSL.cfm? ... OMinute=57
19.01.2018 14.43.40: QSO updated : WA4MIT 160600 20180117 20m FT8
19.01.2018 14.43.40: Contacting EQSL website for EQSL download...
19.01.2018 14.43.41: IMAGE request accepted
19.01.2018 14.43.41: NO IMAGE FOUND
More info:
http://www.eqsl.cc/qslcard/GeteQSL.cfm? ... OMinute=06
Note the password in clear text have been xxxxx out. However when pasting the URL into the web browser I can see the card, so the URL is correct.
However none of the cards are downloaded thru Log4OM and this worked with the same version of Log4OM for a long time up to a couple of months ago. Not it works very intermittently and only a very few cards gets downloaded each time.
Thanks again.
LB6B
On 19 Jan 2018, at 13:27,
Support1@eQSL.cc<mailto:
Support1@eQSL.cc> wrote:
Hi,
I'm new to the advisory Board, but I think this feature has been implemented since a long time.
I remember I have seen warnings on the eQSL site, for people who were attempting to download ALL their eQSL pictures for the entire archive !!!.....
73,
F6DKQ
Support Volunteer
At 11:15 19-Jan-2018 you wrote:
Thank you.
It used to work but up till a few months ago? Has the “throttle” function been implemented over that timeframe?
Ingebrigt
On 19 Jan 2018, at 07:24,
Support1@eQSL.cc<mailto:
Support1@eQSL.cc> wrote:
Hi,
Maybe you try to download too many eQSL at the same time ?
It represents an enormous load on the system.
If your logger allows it (sorry, I don't know it) you could
restrict the date range.
If your logger tries to download images too quickly (more than one picture per 15 seconds), a 'throttle' starts, it prevents rapid download of graphics that are a big load on our system.
Here, again, I don't know if your logger has a reasonable timing.
This has to be discussed between the Log4OM developper and the eQSL Webmaster, N5UP
73,
F6DKQ
Support Volunteer
At 03:16 19-Jan-2018 you wrote:
Hi.
I am running the Log4OM logging SW. When updating received QSL AND downloading QSL card IMAGES I only get downloaded ONE QSL image while the rest gives an error message
NO IMAGE FOUND More info:http:// etc.
I understand from the Log4OM forums that this is something that can get stuck in the eQSL database? Can you please ivestigate this?
Thanks for your kind help!
LB6B