Hi all,
The solution was much more simple than any of the suggestions. The answer was provided by Alex, the autor of Omnirig.
The thing to do was to not have the COM port selected in the radio drop-down tab, but to have Omnirig Radio 1 selected.
73 de Guy G4DWV 4X1LT
Transmit always on IC-7300
- G4DWV - Guy
- Old Man
- Posts: 340
- Joined: 11 Sep 2014, 17:02
[solved] Transmit always on IC-7300
You've never known happiness until you're married; but by then it is too late.
Re: [solved] Transmit always on IC-7300
What Radio drop down - DigiKeyer or WSJT-X????G4DWV - Guy wrote: ↑21 Oct 2017, 18:19Hi all,
The solution was much more simple than any of the suggestions. The answer was provided by Alex, the autor of Omnirig.
The thing to do was to not have the COM port selected in the radio drop-down tab, but to have Omnirig Radio 1 selected.
73 de Guy G4DWV 4X1LT
73 Terry G4POP
- G4DWV - Guy
- Old Man
- Posts: 340
- Joined: 11 Sep 2014, 17:02
Re: Transmit always on IC-7300
Hi Terry,
It was the latter, viz JTDX where Omnirig had to be selected.
Cheers
Guy
It was the latter, viz JTDX where Omnirig had to be selected.
Cheers
Guy
You've never known happiness until you're married; but by then it is too late.
Re: Transmit always on IC-7300
See viewtopic.php?f=10&t=3109#p17220 for WSJT-X substitute JTDXG4DWV - Guy wrote: ↑21 Oct 2017, 19:06Hi Terry,
It was the latter, viz JTDX where Omnirig had to be selected.
Cheers
Guy
3rd line down
73 Terry G4POP
- G4DWV - Guy
- Old Man
- Posts: 340
- Joined: 11 Sep 2014, 17:02
Re: Transmit always on IC-7300
???G4POP wrote: ↑21 Oct 2017, 19:22
See viewtopic.php?f=10&t=3109#p17220 for WSJT-X substitute JTDX
3rd line down
You've never known happiness until you're married; but by then it is too late.
Re: Transmit always on IC-7300
G4DWV - Guy wrote: ↑23 Oct 2017, 11:04???G4POP wrote: ↑21 Oct 2017, 19:22
See viewtopic.php?f=10&t=3109#p17220 for WSJT-X substitute JTDX
3rd line down
so for you read 'In JTDX settings/radio select Omnirig'In WSJT-X settings/radio select Omnirig
73 Terry G4POP
Who is online
Users browsing this forum: No registered users and 3 guests