IC7610 Support on HamLib

Need help? - Post here and we will find a solution for you.
User avatar
G4DWV
Old Man
Posts: 445
Joined: 11 Sep 2014, 16:02

Re: IC7610 Support on HamLib

Post by G4DWV »

Chris,

I have a 7300 and I am sure our settings should be similar. From experience, I bet you have missed something very simple. The phrase about trees and not being able to see the woods because of them springs to mind.

Between terry and myself, I am sure we can sort you out and then your software problems. Terry is a wizard and has been very helpful to me.

Cheers

Guy
You've never known happiness until you're married; but by then it is too late.
m0vue
Novice Class
Posts: 9
Joined: 31 Jul 2018, 07:34

Re: IC7610 Support on HamLib

Post by m0vue »

Hi,

Thanks all.

This is how I seemed to have resolved the issue with the IC-7610 not connecting to OmniRig or WSJT-X SOLVED with Windows 10.

The Icom is setup as follows;

CI-V Baud Rate Auto
CI-V Address 98h
CI-V Transceiver Off
CI-V USB/LAN->REMOTE Tranceiver Address 93h
CI-V Output (for ANT) Off
CI-V USB Port Link to [REMOTE]
CI-V USB Baud Rate Auto
CI-V USB Echo Back ON

Works a treat with WSJT-X, if I change the CI-V Address from 98h it stops working, it seems the WSJT-X settings in HamLib are tied from the Selection of 7610 to the CI-V Address of 98h.

Have a look at the attachments for the screen shots for each application.

So, I now seem to have it working for now, I have no idea how everyone else has, it seems very random.

Chris
M0VUE
Attachments
WSJT-X Settings.PNG
WSJT-X Settings.PNG (95.62 KiB) Viewed 2941 times
OmniRig-v2.PNG
OmniRig-v2.PNG (40.42 KiB) Viewed 2941 times
OmniRig IC-7160 Log4OM.JPG
OmniRig IC-7160 Log4OM.JPG (168.47 KiB) Viewed 2941 times
m0vue
Novice Class
Posts: 9
Joined: 31 Jul 2018, 07:34

Re: IC7610 Support on HamLib

Post by m0vue »

As an aside I can now set Omnirig in WSJT-X and it works with Log4om.
Last edited by m0vue on 02 Aug 2018, 12:08, edited 1 time in total.
User avatar
G4DWV
Old Man
Posts: 445
Joined: 11 Sep 2014, 16:02

Re: IC7610 Support on HamLib

Post by G4DWV »

Chris,

What do you mean about not being able to set Omnirig in WSJT-X?

You are correct about the hex address of the rig. It has to match what is in the software. If there is a definition for the 7610, it will use the default value, otherwise you would have to change it in the rig to use a compatible rig's config.

I would strongly advise that you activate the Split option. It keeps the audio in the middle of the rig's passband and stops harmonics being radiated.

I have attached my settings in JTDX that work with Omnirig. I do have an external interface (MicroHAM DigiKeyer II) that manages my com ports.

Glad you got it sorted.

Cheers

Guy
Attachments
2018-08-02_11h42_45.png
2018-08-02_11h42_45.png (79.28 KiB) Viewed 2941 times
2018-08-02_11h39_03.png
2018-08-02_11h39_03.png (6.52 KiB) Viewed 2941 times
2018-08-02_11h37_33.png
2018-08-02_11h37_33.png (26.76 KiB) Viewed 2941 times
You've never known happiness until you're married; but by then it is too late.
Locked