CAT Control Yaesu FT450D

Need help? - Post here and we will find a solution for you.
Post Reply
vk5nnn
New user
Posts: 2
Joined: 14 Sep 2018, 07:41

CAT Control Yaesu FT450D

Post by vk5nnn » 14 Sep 2018, 07:51

Hi People ....
New to LOG4OM so upfront apologies for dumb questions ....
Tried to connect the radio to PC however no luck . I have tried both options Hamlib and Omnirig.
In saying that HRD Software connects without any problems however i dont like HRD and would like to have LOG4OM connected if possible.

Any help would be greatly appreciated.
Cheers
Ivan

User avatar
G4POP
Moderator
Posts: 5158
Joined: 21 Jan 2013, 15:55
Location: Burnham on Crouch, Essex UK

Re: CAT Control Yaesu FT450D

Post by G4POP » 14 Sep 2018, 07:57

FT450 works fine with Omnirig and Log4OM providing both programs are installed to 'Run as an administrator' see our user guide for instructions.

Of course the Com port and baud rate must match the radio settings
73 Terry G4POP

User avatar
G4POP
Moderator
Posts: 5158
Joined: 21 Jan 2013, 15:55
Location: Burnham on Crouch, Essex UK

Re: CAT Control Yaesu FT450D

Post by G4POP » 18 Sep 2018, 10:35

Another thread with no response for several days so I assume the issue is now resolved?


If it isn't then please let us try to assist further!


If it is resolved then it would be helpful to know what caused the problem
73 Terry G4POP

Post Reply