Icom IC-9700
Posted: 15 May 2019, 23:37
I'm having a few issues getting Log4OM to work with the new IC-9700, the way I want.
This question may be more appropriate to OmniRig, but I'll try here first.
I have written a .ini file for OmnRig, which should allow Log4OM to display VFO A and VFO B frequencies at the same time. For some reason I can only see one or the other in a single frequency window and the display does not change, always showing the data as VFO A. The VFO A and B simultaneous display works fine for my K3S, so it may be a missing parameter in the OmniRig file, but which one? I'm using command 25 (0/1) for VFO A and B.
Also, I'm using Log4OM in conjunction with OmniRig, with LP-Bridge providing multiple pseudo ports for my K3S. My IC-9700 is connected directly via USB. There are no comm port conflicts between the rigs. The K3S is designated as Rig 1 and the IC-9700 is designated as Rig 2 in OmniRig and they are selectable from Log4OM. My issue is that Log4OM will only communicate with Rig 2 (IC-9700) if Rig 1 (K3S) is switched on and connected via LP-Bridge. Without Rig 1 being on, there is no comms or display from Rig 2. Is this a bug, or something I'm doing wrong?
This question may be more appropriate to OmniRig, but I'll try here first.
I have written a .ini file for OmnRig, which should allow Log4OM to display VFO A and VFO B frequencies at the same time. For some reason I can only see one or the other in a single frequency window and the display does not change, always showing the data as VFO A. The VFO A and B simultaneous display works fine for my K3S, so it may be a missing parameter in the OmniRig file, but which one? I'm using command 25 (0/1) for VFO A and B.
Also, I'm using Log4OM in conjunction with OmniRig, with LP-Bridge providing multiple pseudo ports for my K3S. My IC-9700 is connected directly via USB. There are no comm port conflicts between the rigs. The K3S is designated as Rig 1 and the IC-9700 is designated as Rig 2 in OmniRig and they are selectable from Log4OM. My issue is that Log4OM will only communicate with Rig 2 (IC-9700) if Rig 1 (K3S) is switched on and connected via LP-Bridge. Without Rig 1 being on, there is no comms or display from Rig 2. Is this a bug, or something I'm doing wrong?