I wonder if anyone else has this......... Vers 1.17.1.0
If I type a call in to the callsign box and then either do nothing else, or tab so that the name etc details get filled (from qrz, I am a subscriber) AND I then decide I do not want to log the entry, IF I use the keyboard ALT/W to clear the info, the cursor jumps back to the 'Callsign' box which is correct, but it becomes inactive and I cannot they type anything without first clicking the box (or somewhere on the window.).... However, if click the CLR button over on the right hand side of the page, all works correctly.
73
John
Clearing unwanted Callsign
- VK7XX
- Old Man
- Posts: 437
- Joined: 24 Jan 2013, 04:07
- Location: Planet Earth on Tasmania Island
- Contact:
Re: Clearing unwanted Callsign
Thanks Terry. Yes, the ESCape key works just fine.. I am so used to using Alt/W that it just comes naturally. Maybe it can be fixed sometime in the future.. It certainly is not a "must have" fix.
John
John
- DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: Clearing unwanted Callsign
You can also doubleclick in the Callsign field to clear all the fields ....
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
- IW3HMH
- Site Admin
- Posts: 2926
- Joined: 21 Jan 2013, 14:20
- Location: Quarto d'Altino - Venezia (ITA)
- Contact:
Re: Clearing unwanted Callsign
ALT-W should work exactly as double-click/esc
i'll check for possible issues on that.
Thanks for reporting
i'll check for possible issues on that.
Thanks for reporting
Daniele Pistollato - IW3HMH
- IW3HMH
- Site Admin
- Posts: 2926
- Joined: 21 Jan 2013, 14:20
- Location: Quarto d'Altino - Venezia (ITA)
- Contact:
Re: Clearing unwanted Callsign
just saw that ALT button is catched by the MENU on top bar, so focus is on menu instead of the field.
Searching for a solution...
Searching for a solution...
Daniele Pistollato - IW3HMH