It would be nice to have, on the main Log4OM screen, a selection which would allow a user to toggle back and forth between several rigs. Maybe a check box for each rig the user has set-up in OmniRig.
This would allow fast rig switching during contests and other events.
Multi-Rig Control
Multi-Rig Control
K7PT-Chuck "#1 Top of the Honor Roll"
- G4POP
- Log4OM Alpha Team
- Posts: 10817
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Multi-Rig Control
That probably fits with our Mantis future feature of SO2R quiet well!
73 Terry G4POP
Re: Multi-Rig Control
I worked through the various settings using OmniRig control and I elected to use Com 1 for my FT-1000MP and Com 4 for my FT-1000D; I found that the green 'CAT' icon was displayed when I selected the FT-1000MP with the correct frequency being indicated in the main window of the program.
However I have been unable to change over to the FT-1000-D in a similar way, in fact when the change to Com 4 was effected, the frequency in the main window remained the same as was indicated with the FT-1000MP!!
I use other logging programs using the same configuration, as above, and found that I can readily switch between radios. I suspect that a future upgrade to the program might be considered to incorporate such a switch.
Many thanks
Ron, VE7NS
However I have been unable to change over to the FT-1000-D in a similar way, in fact when the change to Com 4 was effected, the frequency in the main window remained the same as was indicated with the FT-1000MP!!
I use other logging programs using the same configuration, as above, and found that I can readily switch between radios. I suspect that a future upgrade to the program might be considered to incorporate such a switch.
Many thanks
Ron, VE7NS
- G4POP
- Log4OM Alpha Team
- Posts: 10817
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Multi-Rig Control
Hi Ron,
At this time we have not enabled "Rig 2" in Omnirig and as I mentioned above we do have this on our list of items to add in the near future.
73
At this time we have not enabled "Rig 2" in Omnirig and as I mentioned above we do have this on our list of items to add in the near future.
73
73 Terry G4POP
Re: Multi-Rig Control
Terry:
Thanks for your response. I shall await the inclusion of that feature in a future program upgrade.
73, Ron
VE7NS
Thanks for your response. I shall await the inclusion of that feature in a future program upgrade.
73, Ron
VE7NS
Re: Multi-Rig Control
Working well with 2 rigs at the same time now with version 1.11.5.0
Rob
Rob