k2jf wrote:I wonder if it could be the RTS DTR settings. I tried a different CAT device - Blackcat. Didn't help. But just now I set the RTS and DTR both to high... so far so good. Anyone else have the Icom 756 Pro III? what are your RTS DTR settings?
Yes I have the ProIII with a G4ZLP Digimaster Pro Three interface
Omnirig settings are:
Comport = Your choice
Baud Rate 19200
Data bits 8
Parity None
Stop bits 1
RTS High
DTR High
Poll Int 1000
Timeout 4000
However it does not sound like a settings issue!