CAT Control Yeasu 817-ND

Need help? - Post here and we will find a solution for you.
Post Reply
shovell
New user
Posts: 1
Joined: 19 Sep 2018, 20:13

CAT Control Yeasu 817-ND

Post by shovell » 19 Sep 2018, 20:17

Hi All,
Can you help - I cannot get the CAT connection to work - Yeasu 817-ND (USB Cable)
I have connected to other software packages and controllers with this cable and Radio

Any ideas?

Thanks

User avatar
DF5WW
Moderator
Posts: 948
Joined: 02 May 2013, 10:49
Location: Höhr-Grenzhausen, Rhineland Palatinate, Germany
Contact:

Re: CAT Control Yeasu 817-ND

Post by DF5WW » 19 Sep 2018, 22:06

Some ideas, smile ....

Which CAT control you are using in Log4OM ? Hamlib (which is integrated) or Omnirig (which needs a seperate
installation) ? Did you have installed Log4OM and Omnirig with administrator privileges ? Both, Omnirig and
Log4OM, needs a "Run as Administrator" installation. If that all is o.k. you have to set Omnirig to FT-817 and
you need the correct virtual COM port from your USB. All settings in Omnirig and your CAT in your TRX must
be identical ....

If you are unsure check our great manual. Normally Log4OM/Omnirig/FT-817 working fine together ... ;) ;)

By the way, it would be fine to have a name and a callsign .... ;) ;)
73´s .. Juergen ... RedPitaya SDR 5 W, 20 mtr. indoor wireloop feeded with homemade ladderline (600 Ohms) ...

Post Reply