CAT Control Yeasu 817-ND

Need help? - Post here and we will find a solution for you.
Locked
User avatar
DF5WW
Log4OM Alpha Team
Posts: 2031
Joined: 02 May 2013, 09:49
Location: Kraam, Rhineland Palatinate, Germany
Contact:

Re: CAT Control Yeasu 817-ND

Post by DF5WW »

Some ideas, smile ....

Which CAT control you are using in Log4OM ? Hamlib (which is integrated) or Omnirig (which needs a seperate
installation) ? Did you have installed Log4OM and Omnirig with administrator privileges ? Both, Omnirig and
Log4OM, needs a "Run as Administrator" installation. If that all is o.k. you have to set Omnirig to FT-817 and
you need the correct virtual COM port from your USB. All settings in Omnirig and your CAT in your TRX must
be identical ....

If you are unsure check our great manual. Normally Log4OM/Omnirig/FT-817 working fine together ... ;) ;)

By the way, it would be fine to have a name and a callsign .... ;) ;)
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
Locked