Welcome All
I exported the log from Log4OM-1 in Adif 3 format (11300 QSO) and when importing into a new database in Log4OM 2 - import hangs (once at 3000 QSO, another time with a smaller number) - CPU usage increases to 90% - 657MB RAM and the end.
I did 3 tries and it's the same.
A smaller file from another log (4000 QSOs) was imported without problems
What is the reason?
ADIF import from Log4OM
ADIF import from Log4OM
Log4OM V2, JTDX 2.2.1-158.x64, HP Compaq i5, Windows 10 x64
Yaesu FT-897D, Icom IC-735, Musb1017/Musb2232FK, ATU-150,LDG-AT-200Pro
SGC PowerClear, EMU0202
.........................................
73!
Jan SQ9JXB
Yaesu FT-897D, Icom IC-735, Musb1017/Musb2232FK, ATU-150,LDG-AT-200Pro
SGC PowerClear, EMU0202
.........................................
73!
Jan SQ9JXB
Re: ADIF import from Log4OM
Have you changed the amout of qso's in the main UI right hand corner of the screen Max=5000 qso's. Increase the amount required records and try the import.sq9jxb wrote: ↑16 Jan 2020, 15:18 Welcome All
I exported the log from Log4OM-1 in Adif 3 format (11300 QSO) and when importing into a new database in Log4OM 2 - import hangs (once at 3000 QSO, another time with a smaller number) - CPU usage increases to 90% - 657MB RAM and the end.
I did 3 tries and it's the same.
A smaller file from another log (4000 QSOs) was imported without problems
What is the reason?
Good luck
Aldo VA3AG
Re: ADIF import from Log4OM
Hello Aldo
I have changed to 15000 and it has become 4189 QSO.
EDIT:
I turned off the "Apply country correction on load" and Info Providers options and, strangely enough, imported everything without a problem - CPU usage - 45% max.
Uff
I have changed to 15000 and it has become 4189 QSO.
EDIT:
I turned off the "Apply country correction on load" and Info Providers options and, strangely enough, imported everything without a problem - CPU usage - 45% max.
Uff
Log4OM V2, JTDX 2.2.1-158.x64, HP Compaq i5, Windows 10 x64
Yaesu FT-897D, Icom IC-735, Musb1017/Musb2232FK, ATU-150,LDG-AT-200Pro
SGC PowerClear, EMU0202
.........................................
73!
Jan SQ9JXB
Yaesu FT-897D, Icom IC-735, Musb1017/Musb2232FK, ATU-150,LDG-AT-200Pro
SGC PowerClear, EMU0202
.........................................
73!
Jan SQ9JXB
Re: ADIF import from Log4OM
My large ADIF with 6017 QSO's go not. I had to split the file into 5 parts and work it Old database from v1 work not, i had create new and importing ADIF again. 73
Re: ADIF import from Log4OM
Welcome
Log exported to ADIF 3?
Log4OM V2, JTDX 2.2.1-158.x64, HP Compaq i5, Windows 10 x64
Yaesu FT-897D, Icom IC-735, Musb1017/Musb2232FK, ATU-150,LDG-AT-200Pro
SGC PowerClear, EMU0202
.........................................
73!
Jan SQ9JXB
Yaesu FT-897D, Icom IC-735, Musb1017/Musb2232FK, ATU-150,LDG-AT-200Pro
SGC PowerClear, EMU0202
.........................................
73!
Jan SQ9JXB
- DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: ADIF import from Log4OM
It was mentioned in the release announcement and in the V2 manual that V2 can´t work with the V1 database
and that it need a full new setup and a new created database. Also was mentioned that V2 can only import
ADIF 3. My QSO count is more than 24.000 and i´ve imported this sometimes to older alpha versions of V2 without
problems. The must have is an ADIF 3 file and if you have an older PC it could be help to uncheck the box
"Apply country corrections on load".
Your log isn´t so big but for test delete the new database and try to importing a fresh ADIF 3 from Log4OM V1.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
- IW3HMH
- Site Admin
- Posts: 2927
- Joined: 21 Jan 2013, 14:20
- Location: Quarto d'Altino - Venezia (ITA)
- Contact:
Re: ADIF import from Log4OM
If you have an ADIF from V1 that won't import correctly or hangs on import please send it to me at log4om @ gmail (dot) com
Please add a brief note to the mail with link to this thread so i can understand why you're sending it
Thanks
Please add a brief note to the mail with link to this thread so i can understand why you're sending it
Thanks
Daniele Pistollato - IW3HMH
Re: ADIF import from Log4OM
Exported to ADIF 3 stay in file and Log4OM v1.40 In v1 i had import as ADIF 3:
<ADIF_VERS:5>3.0.4 <PROGRAMID:6>Log4OM <PROGRAMVERSION:8>1.40.0.0 <eoh>
v2 have problem with large ADIF but in v1 no problems all time Old database i mean SQLite file. If worked right, after are all QSO's easy back but work not and needed import ADIF again
Re: ADIF import from Log4OM
Still imported as small files, only old SQLite database working not, need create new and import all ADIF's back
Re: ADIF import from Log4OM
Need help with another viewtopic.php?f=6&t=3670