Congrats, great work but,
If I use double klick into cluster window for switching the TRX frequentie from CW to SSB and also at the same time to a other band I have a schift from 700Hrz this is what happens into V1 if I set the option "Send FREQ before MODE" I can not find where I can change it into V2
my rig FTDX101
Thanks on7kz
Missing Special functions into CAT config
Re: Missing Special functions into CAT config
FWIW - I've tried several changes with double-clicks on spots in the cluster window (F8).
Changes to new band/frequency and mode and lines up with frequency noted in the F8 Cluster.
I'm using a K3 radio with CAT control via OmniRig.
I can't seem to repeat Luc's noted issue.
Changes to new band/frequency and mode and lines up with frequency noted in the F8 Cluster.
I'm using a K3 radio with CAT control via OmniRig.
I can't seem to repeat Luc's noted issue.
73 - Nolan Kienitz - KI5IO
Plano, TX
Plano, TX
Re: Missing Special functions into CAT config
Hello,
these is a typical problem with Yaesu, I have a Ft-847 FT-1000 and FTDX101
all of these give the same error
Example: TRX is on 3510 into CW double click in cluster window for change to 14.250 SSB
the TRX is going to 14.243 the difference is the pitch for CW.
A second double click on the Freq. place the TRX correct on Freq.
In V1 I can simulate that with setting the flag "Send Freq before MODE"
greetings
Luc , ON7KZ
these is a typical problem with Yaesu, I have a Ft-847 FT-1000 and FTDX101
all of these give the same error
Example: TRX is on 3510 into CW double click in cluster window for change to 14.250 SSB
the TRX is going to 14.243 the difference is the pitch for CW.
A second double click on the Freq. place the TRX correct on Freq.
In V1 I can simulate that with setting the flag "Send Freq before MODE"
greetings
Luc , ON7KZ
Re: Missing Special functions into CAT config
Hello,
issue with CAT for the FTDX101 can be solved to SET into CW menu "direct frequentie" not pitch schift
greetings Luc, ON7KZ
issue with CAT for the FTDX101 can be solved to SET into CW menu "direct frequentie" not pitch schift
greetings Luc, ON7KZ