LOTW Upload awkward and slow

[NN7D]

Mike,

What is your max: setting in the lower right corner of the QSL Manager screen?

Have you tried reducing the GRID default row count - in Configurations, Program Settings tab, to something less - I use 1000 - it will speed things up considerably with the QSL Manager operations.

Doug
W7DRM

[w9mdb]

I have it set to 100. Not sure why it would matter as there is no "limit" on the SQL query and that number is only for how many are displayed.

[NN7D]

Ok, well I thought I would try, but you already have a low number set. It does make a difference, if you have a higher default Max setting, it will take even longer. I see quite a bit of time difference between max settings of 10,000 and 1,000.

Doug
W7DRM

[W3LI]

I have not been able to upload even 1 Q to LOTW. Ver 1 was a snap. I will accept the fact that maybe i am not understanding the setup.
I hope that in time I will figure out what is wrong.
You all enjoy what you have been able to do even if it takes longer.

[w9mdb]

What I found works best for me...trying to to through this too fast just makes for inconsistent behavior.

#1 Utilities/QSL Manager...wait for QSOs to show up in the table
#2 In "Search Confirmatino" select LOTW...wait for QSOs to show up in the table
#3 Click "Select required"...wait for QSOs to show up and be selected...they should be highlighed now
#4 Click "Upload selected QSO"...you should see a number in the "QSO Count"
#5 Click the green up arrow in the cloud...that should then upload the selected QSOs

de Mike W9MDB

[N6VH]

Version 2.5.0.0 has improved this process. Thanks very much.

73,

Jim N6VH