Hamlib 4.0
Re: Hamlib 4.0
Tried to contact you on Skype -- give me a buzz. mdblack98
Re: Hamlib 4.0
rigctld --vfo
rigctl -m 2
Rig command: F VFOB 146000000
VFO:
Rig command: f VFOA
VFO: Frequency: 145000000
Rig command: f VFOB
VFO: Frequency: 146000000
rigctl -m 2
Rig command: F VFOB 146000000
VFO:
Rig command: f VFOA
VFO: Frequency: 145000000
Rig command: f VFOB
VFO: Frequency: 146000000
- G4POP
- Log4OM Alpha Team
- Posts: 10880
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Hamlib 4.0
I only see people on my specific Skype list so that would be why I was not notified of your attempt to call me.
Busy today perhaps tomorrow
73 Terry G4POP
Re: Hamlib 4.0
FYI...I'm going to add a new \getvfo command to rigctld so you can ask for A/B freq/mode/width on each vfo.
The idea would be to replace the "f" command with "\getvfo VFOA" or "\getvfo VFOB" as desired and you'll get 3 lines of answer freq/mode/width -- not sure we need any more info than that.
14074000
USB
24000
The idea would be to replace the "f" command with "\getvfo VFOA" or "\getvfo VFOB" as desired and you'll get 3 lines of answer freq/mode/width -- not sure we need any more info than that.
14074000
USB
24000
Re: Hamlib 4.0
In the 4.2 github repo I've added two new commands
This function will tell you if you have to use VFOA/B or Main/Sub based on what VFOs the rig has (some rigs support both).
\get_vfo_list
VFOs: VFOA VFOB Sub Main MEM
And this one will return freq/mode/width by VFO
\get_vfo_info VFOA
14074000
USB
2400
\get_vfo_info VFOB
14074500
USB
2400
Some rigs don't behave well getting the alternate VFO frequency so I would put a checkbox on the hamlib screen to "Enable 2nd VFO" for those that want it.
Mike W9MDB
This function will tell you if you have to use VFOA/B or Main/Sub based on what VFOs the rig has (some rigs support both).
\get_vfo_list
VFOs: VFOA VFOB Sub Main MEM
And this one will return freq/mode/width by VFO
\get_vfo_info VFOA
14074000
USB
2400
\get_vfo_info VFOB
14074500
USB
2400
Some rigs don't behave well getting the alternate VFO frequency so I would put a checkbox on the hamlib screen to "Enable 2nd VFO" for those that want it.
Mike W9MDB
Re: Hamlib 4.0
> 4.0 Seems work fine...replaced the hamlib_riglist.csv with the attached.
Done that but Log4OM is still calling radio ID 229 (Elecraft K3)
Hamlib 4.0 new radio ID for K3 is 2029.
How do I make Log4OM using the new hamlib_riglist.csv?
73, Markus HB9BRJ
Done that but Log4OM is still calling radio ID 229 (Elecraft K3)
Hamlib 4.0 new radio ID for K3 is 2029.
How do I make Log4OM using the new hamlib_riglist.csv?
73, Markus HB9BRJ
Re: Hamlib 4.0
Replace the riglist.txt file with this one
https://www.dropbox.com/s/c6vexfg7psc45 ... t.txt?dl=0
Mike W9MDB
https://www.dropbox.com/s/c6vexfg7psc45 ... t.txt?dl=0
Mike W9MDB
Re: Hamlib 4.0
Thanks Mike, but Log4OM still thinks my K3 is rig 229:
Code: Select all
2021-02-11 14:36:33.0071 INFO: [#=zJ$k_$zX4tPd$1sUTRg==] : [HAMLIB] Starting Hamlib service
2021-02-11 14:36:33.0150 INFO: [#=zJ$k_$zX4tPd$1sUTRg==] : [HAMLIB] Using existing connection: False
2021-02-11 14:36:33.1640 INFO: [#=z6blQQuk=] : [HAMLIB] DAEMON STARTED: C:\PortableApps\Log4OM2\config\hamlib\rigctld.exe --model=229 --rig-file=COM1 --serial-speed=38400 --port=4532 --set-conf=stop_bits=1
2021-02-11 14:36:33.2240 INFO: [#=z6blQQuk=] : [HAMLIB] Hamlib Process exit code: 2
2021-02-11 14:36:33.2311 INFO: [#=z6blQQuk=] : [HAMLIB] DAEMON STOPPED. Hamlib instance terminated
2021-02-11 14:36:37.1121 ERROR: [HamlibEngine][#=zy1OA7zNvdzdgSJhGk2WC0eI=] : [EXCEPTION] No connection could be made because the target machine actively refused it 127.0.0.1:4532 System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 127.0.0.1:4532
at System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port)
at L4ONG.BL.CAT.HamlibEngine.#=zy1OA7zNvdzdgSJhGk2WC0eI=()
Re: Hamlib 4.0
Oops...wrong file...
https://www.dropbox.com/s/snqt80tg2u28b ... t.csv?dl=0
This one goes in Roaming\Log4OM2
Mike W9MDB
https://www.dropbox.com/s/snqt80tg2u28b ... t.csv?dl=0
This one goes in Roaming\Log4OM2
Mike W9MDB
Re: Hamlib 4.0
Hamlib 4.1 win64 working fine now.
Forgot to re-select my rig in Log4OM's Connect > CAT > Show CAT interface screen:
73, Markus HB9BRJ
Forgot to re-select my rig in Log4OM's Connect > CAT > Show CAT interface screen:
73, Markus HB9BRJ