CQ Zones not in Cluster Field

[N4RF]

On my cluster views (both main screen Cluster (F8 and View - Cluster View), the CQ Zone fields are not populated. The field is there, but no info. I looked for an answer in the Log4OM online manual and no luck. It may be a VE7CC setting that i looked for and haven't found.

Bob N4RF

[G4POP]

Tip

Watch the raw data being received from the cluster servers in the connect/Telnet/cluster management - Management tab

If there are no zones in the raw data then the cluster is not providing that information either because you have it configured incorrectly or because it just does not provide it

[N4RF]

Thanks Terry,

No there is nothing in the VE7CC management screen for CQ Zones. I have CQ Zones checked in Grid Config for VE7CC, but it too is not populated with the zone number.

Bob N4RF

[KI5IO]

Pretty normal that the CQ and ITU zones are not in feed from ve7cc-1 cluster.

Once spots are clicked on the zones are filled in from Info Providers: QRZ, HamQTH, CTY, Clublog, etc., etc..