Setup log4om + hamlib + flrig
Posted: 11 Apr 2021, 08:34
Hello,
I connected Flrig with Fldigi and they work well together + FT-891.
I can't set the CAT/hamlib from log4om to work with the above setup.
- In log4om / CAT management I selected CAT engine - hamlib / autostart.
- In Hamlib I selected RIG Model: FLRig Stable.
- I don't know what settings to do next for Flrig in the Hamlib window or in FLrig setup menu (serial parameters / TCP Radio parameters / TCP Connection, etc).
Atached is my hamlib setup.
When I click un green ok (V) in right lower corner, CAT status: Disconnected indicator turns green "Connected" for 1-2 seconds then turns off.
I also try to click "open hamlib standalone", then ok (V) with the same results (connected only 1-2 seconds).
The transceiver frequency is not displayed in the log4om window.
During this time Fldigi, Flrig and FT-891 communicate with each other.
I can't get it working together for log4om + fldigi + flrig + FT-891 or only log4om + flrig + FT-891.
I know how to setup log4om to work with hamlib + FT-891 + Fldigi but not toghether with Flrig.
Using win10 home and all programs are the latest versions.
Thank you in advance,
Gabriel, yo3cen
I connected Flrig with Fldigi and they work well together + FT-891.
I can't set the CAT/hamlib from log4om to work with the above setup.
- In log4om / CAT management I selected CAT engine - hamlib / autostart.
- In Hamlib I selected RIG Model: FLRig Stable.
- I don't know what settings to do next for Flrig in the Hamlib window or in FLrig setup menu (serial parameters / TCP Radio parameters / TCP Connection, etc).
Atached is my hamlib setup.
When I click un green ok (V) in right lower corner, CAT status: Disconnected indicator turns green "Connected" for 1-2 seconds then turns off.
I also try to click "open hamlib standalone", then ok (V) with the same results (connected only 1-2 seconds).
The transceiver frequency is not displayed in the log4om window.
During this time Fldigi, Flrig and FT-891 communicate with each other.
I can't get it working together for log4om + fldigi + flrig + FT-891 or only log4om + flrig + FT-891.
I know how to setup log4om to work with hamlib + FT-891 + Fldigi but not toghether with Flrig.
Using win10 home and all programs are the latest versions.
Thank you in advance,
Gabriel, yo3cen