salve
spesso la configurazione CAT , allegata , non rimane memorizzata
capita a qualcuno ?
cosa posso controllare ?
grazie
cc
configurazione CAT
configurazione CAT
- Attachments
-
- cat.JPG (79.6 KiB) Viewed 7515 times
-
- cat1 k4.JPG (93.27 KiB) Viewed 7515 times
-
- cat log k4.JPG (145.38 KiB) Viewed 7515 times
Re: configurazione CAT
Use Omnirig instead of Hamlib.
Hamlib is flaky and connections don't seem to remain sticky.
Lele is looking into this issue as it seems to persist.
Hamlib is flaky and connections don't seem to remain sticky.
Lele is looking into this issue as it seems to persist.
73 - Nolan Kienitz - KI5IO
Plano, TX
Plano, TX
Re: configurazione CAT
grazie Nolan ma omnirig non ha ETH , sbaglio ?
non ho COM libere sulla radio , impegnate con jtdx e mmtty
ci sono altri modi per usare la ETH ?
non ho COM libere sulla radio , impegnate con jtdx e mmtty
ci sono altri modi per usare la ETH ?
Re: configurazione CAT
Carlo,
Aahh ... you have more connected and trying to be operated than what was noted in your first post.
So now there are many more questions to try to help debug the issue.
See Terry's post at this URL: https://forum.log4om.com/viewtopic.php?p=41501#p41501
More information is needed.
Aahh ... you have more connected and trying to be operated than what was noted in your first post.
So now there are many more questions to try to help debug the issue.
See Terry's post at this URL: https://forum.log4om.com/viewtopic.php?p=41501#p41501
More information is needed.
73 - Nolan Kienitz - KI5IO
Plano, TX
Plano, TX
Re: configurazione CAT
thanks Nolan
the connection with hamlib in ETH is made
the problem that my log4om does not store the configuration and every time I have to reconfigure
HAM LIB PARAMETERS-NETWORK CONNECTED RADIO-TCP RADIO PARAMETERS
The basic information we require to assist a user is as follows:
1. Has the radio ever worked with any other software for CAT control?
yes
2. Is any other program running that uses CAT control at the same time as Log4OM?
yes,jtdx (com 3)and sometimes together mmtty (com4)
3. What is the make and model of the radio?
k4
4. Exact version numbers of Log4OM, Omnirig and any other software involved – Its not good enough to say ‘The latest version’
log 2.23 and his hamlib
5. What connecting interface cable are you using to connect the radio to the computer?
eth
6. Describe exactly what does not work, no frequency and mode in Log4OM, Log4om does not follow tuning of the radio, cluster issues etc etc etc – details are important!
it almost always works or at least when log4om remembers the configuration
7. What connecting system are you trying to use, Hamlib, Omnirig, TCI etc?
hamlib eth
8. If using Omnirig which version, the original Afreet version or the Swiss version?
omnirig1.2 ve3nea (using com always works
9. Did you install the Icom, Yaesu or Kenwood dedicated USB drivers as instructed in your radios user guide?
yes
10. Are you certain that the com port and baud rate settings are the same in Log4OM as selected in the Radio’s menu system?
yes
11. Are you trying to connect to the radio from a remote location or via a network?
no
This information will of necessity raise other questions but please note its very hard to resolve CAT issues by using Teamviewer because we cant access the radio or its menus so please don’t ask?
the connection with hamlib in ETH is made
the problem that my log4om does not store the configuration and every time I have to reconfigure
HAM LIB PARAMETERS-NETWORK CONNECTED RADIO-TCP RADIO PARAMETERS
The basic information we require to assist a user is as follows:
1. Has the radio ever worked with any other software for CAT control?
yes
2. Is any other program running that uses CAT control at the same time as Log4OM?
yes,jtdx (com 3)and sometimes together mmtty (com4)
3. What is the make and model of the radio?
k4
4. Exact version numbers of Log4OM, Omnirig and any other software involved – Its not good enough to say ‘The latest version’
log 2.23 and his hamlib
5. What connecting interface cable are you using to connect the radio to the computer?
eth
6. Describe exactly what does not work, no frequency and mode in Log4OM, Log4om does not follow tuning of the radio, cluster issues etc etc etc – details are important!
it almost always works or at least when log4om remembers the configuration
7. What connecting system are you trying to use, Hamlib, Omnirig, TCI etc?
hamlib eth
8. If using Omnirig which version, the original Afreet version or the Swiss version?
omnirig1.2 ve3nea (using com always works
9. Did you install the Icom, Yaesu or Kenwood dedicated USB drivers as instructed in your radios user guide?
yes
10. Are you certain that the com port and baud rate settings are the same in Log4OM as selected in the Radio’s menu system?
yes
11. Are you trying to connect to the radio from a remote location or via a network?
no
This information will of necessity raise other questions but please note its very hard to resolve CAT issues by using Teamviewer because we cant access the radio or its menus so please don’t ask?
Re: configurazione CAT
Carlo,
Download and try V2.24.0.0 as Lele has made some code changes in that release that might help address your Hamlib issues.
Check the V2.24.0.0 Release Notes here: http://www.log4om.com/
Download and try V2.24.0.0 as Lele has made some code changes in that release that might help address your Hamlib issues.
Check the V2.24.0.0 Release Notes here: http://www.log4om.com/
73 - Nolan Kienitz - KI5IO
Plano, TX
Plano, TX
- G4POP
- Log4OM Alpha Team
- Posts: 10817
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: configurazione CAT
I am not sure how well Hamlib supports ETH because we have no history with that system to try.
However if you use Omnirig for the K4 connection to the K4 via the com port and RIG1
Then instead of cnnecting JTDX to the com port follow our user guide instructions for UDP connections to JTDX
Then with MTTY you should be able to connect to Omnrig rig 1 and multithread the connection
That way you avoid com port clashes and don't have to use ETH
73 Terry G4POP
Re: configurazione CAT
gentilmente Terry mi indichi il link delle istruzioni ?
ho fatto la configurazione e sembra funzionare vorrei in ogni caso verificare con la guida
grazie
carlo
ho fatto la configurazione e sembra funzionare vorrei in ogni caso verificare con la guida
grazie
carlo