Log4OM

K2GRG

Actually, I'm very happy to contribute something, even this small, to support your efforts. Thanks.

K2GRG

Numbering error on page 224 of the English manual:

Under the Log4OM heading, the numbered steps are numbered 1-3-4

K2GRG

That did it. Thanks very much, though I should have checked myself... Donation made to support Log4OM.

K2GRG

If I enter a callsign by typing it in the box, the data lookup function doesn't happen. If I click on a callsign that's in a cluster spot, it fills in the box, the small "data lookup" popup happens, and the data is filled and worked before data is shown. If I type it in myself, it doesn't ...

K2GRG

Please allow me to offer the following suggestion: Relocate the Save QSO, Web Lookup, and Clear buttons from the far right margin to an area near the other QSO data information, such as immediately below the callsign or to the right of the signal report info. Benefits: Easier to reach with the mouse...

K2GRG

Thanks, Nolan. My guess is that the latest firmware on the amp is finicky in terms of delayed commands. I've installed Log4OM on a faster PC (an i7) and it seems to do a bit better, but still has CAT errors, where HRD does not. When the program is "thinking," such as when it's doing a look...

K2GRG

Thank you for your post.

The splitter is from the manufacturer and is how the amp is supposed to get CAT data.

It is configured properly according to their instructions and inspection so as to only monitor the CAT data and not send anything.

K2GRG

My SPE Expert 1.5K-FA amp displays a "CAT error" message frequently when using Log4OM. It can occur at any time, but often occurs when switching between bands. The factory says this error is due to a polling interval problem, with a longer polling interval tripping an error in the amp firm...

K2GRG

My edit of the FT-950 ini wasn't successful, but setting the rig type to FTDX-3000 gives me a working configuration. If I was ambitious I'd cut/paste the split setting from the FTDX-3000 into the FT-950 ini, or simply make a copy of the entire file and rename it.

K2GRG

I have the same issue with Omnirig and the FT-950. I found that if I open the OmniRig app and leave it open, then restart Log4OM, the problem goes away and Log4OM displays accurately.

Search found 10 matches

Re: User Manual Error

User Manual Error

Re: Data lookup not working on entry

Data lookup not working on entry

Relocation of Save QSO, Web Lookup, and Clear buttons

Re: CAT error on SPE Expert amp

Re: CAT error on SPE Expert amp

CAT error on SPE Expert amp

Re: Omnirig reporting radio in SPLIT when it isnt

Re: Omnirig reporting radio in SPLIT when it isnt