JTAlert logging

Regarding connecting to external program's.
Post Reply
pa3cps
Novice Class
Posts: 4
Joined: 04 Nov 2016, 07:18

JTAlert logging

Post by pa3cps » 04 Nov 2016, 14:43

Is use:
Windows 10, WSJT-X 1.7 RC2, JTAlert 2.8.4, LOG4OM v1.26.0.0

I have sometimes problems with the logging from JTAlert to LOG4om.
With several qso's everything works perfect, but sometime's i get a failure and i have to log the qso manual.

Failure: QSO not logged!
ERROR Message: LOG4OM file: unable to confirm QSO logged
NOTE: The QSO is still saved to the WSJT-X Log file


Someone recognize this problem?

User avatar
DF5WW
Log4OM Alpha Team
Posts: 1298
Joined: 02 May 2013, 09:49
Location: Kraam, Rhineland Palatinate, Germany

Re: JTAlert logging

Post by DF5WW » 06 Nov 2016, 11:01

This is a known Errormessge but normally all QSO will be logged in Log4OM by JTAlert. Before you log manually try a refresh in the Log4OM Recent QSO Window (F8) to see the contact is logged or not. There is no automatted refresh ;) ;)
73´s .. Juergen ... ALT-512 SDR (10W) , 2 x 6,5 mtr. indoor wire at CG-3000 autotuner ...

N6VH
Advanced Class
Posts: 66
Joined: 07 Nov 2015, 15:41

Re: JTAlert logging

Post by N6VH » 06 Nov 2016, 16:51

In JTAlert, go to Settings/Miscellaneous/Performance. Under Check QSO Log Record, increase the time. I have mine set at 10 seconds. Hope this helps.

pa3cps
Novice Class
Posts: 4
Joined: 04 Nov 2016, 07:18

Re: JTAlert logging

Post by pa3cps » 09 Nov 2016, 16:44

Problem solved:

Solution:
I did a fresh Windows 10 install.

Post Reply