Red Pitaya SDR and Log4OM works great ...
Posted: 09 Mar 2017, 15:07
Since a few days i am working at my HPSDR kompatible SDR project based for the small little Red Pitaya bord. RX and TX working fine meanwhile and also a 5 W amplifier is integrated. In the next days i will integrate a audio codec board to reduce latency times and also some switched LPF´s for the hamband including the 60 m band.
Today i am tested the connection between Omnirig/PowerSDR.mRX_3.3.9 and Log4OM.
After installing a few Com/Com lines with VSPM i got connect and all was working well. Will check tose days for compatibility with 3rd party software like JTDX, JTalertX, Fldigi and some more but need to install VAC or another virtual audio first.
I posted this for the home brewers of SDR Radios using PowerSDR or a clone of it. It works great with Omnirig and Log4OM
Tried to insert a screenshot but the file was to large, i´m sorry
Today i am tested the connection between Omnirig/PowerSDR.mRX_3.3.9 and Log4OM.
After installing a few Com/Com lines with VSPM i got connect and all was working well. Will check tose days for compatibility with 3rd party software like JTDX, JTalertX, Fldigi and some more but need to install VAC or another virtual audio first.
I posted this for the home brewers of SDR Radios using PowerSDR or a clone of it. It works great with Omnirig and Log4OM
Tried to insert a screenshot but the file was to large, i´m sorry