Distance Refresh

[VE2ESF]

Hello to everyone,

I have a small problem trying to refresh the distance field in my database.

Going through the database, I noticed that some of my QSOs had no information in the Grid square field and I started to update all the missing fileds from the latests QSOs to the oldest by getting their address and inputing it in the Grid square locatotr map engine (http://www.levinecentral.com/ham/grid_square.php). After adding the corrected Grid square information for each QSO, I refreshed the data and saved the file. In doing so, I noticed that the distance field that was at zero precedently was updated to the proper value accoding to corrected position between my station and the receiver. I did that for serveral tens of QSOs but came to a problem near the end of my database.

Even though I corrected the Grid square and saved it, the distance field would not update... All of the other QSOs after that one in the database had the same problem and their distance would not also update. I tested that the newer QSOs that I corrected their Grid square field had not this problem.

Can anyone tell me what I am doing wrong ?

I'm using Log4OM2 version 2.8.0.0 and my databse has 1147 QSOs.

Thanks for the help,

Roger
VE2ESF

[G4POP]

See the LATEST user guide 're QSO manager

[VE2ESF]

Found it... My QTH info wasn't complete in those first contacts...

Thanks Terry for the help.

Roger
VE2ESF