Station Configuration not looking for band worked

Post Reply
ph2m
Novice Class
Posts: 10
Joined: 24 Sep 2015, 20:42
Location: JO22hc

Station Configuration not looking for band worked

Post by ph2m »

Hello all,

I 'am running 2 rigs via omnirig, together mainly in FT8-mode with JTDX & GridTracker, finished QSO's are logged in Log4OM via GridTracker.
So I' am running mostly 2 rigs together at the time (in Log4OM as Rig1 + Rig2) but in My (F4) I can choose only ONE Radio + Antenna setup, this causing when I log a QSO on HF and then a QSO on VHF both QSO's logged as using my Primary Radio: IC-7300 and Primary antenna EAntenna 5070OWA9
Log4OMStationConfig.JPG
Log4OMStationConfig.JPG (116.85 KiB) Viewed 671 times
MyStation.JPG
MyStation.JPG (158.34 KiB) Viewed 671 times
How can I log each QSO with the correct MyRig & Antenna used per band ?!

73 de Frank PH2M (using always latest version of Log4OM v.2.17.0.0)
User avatar
G4POP
Log4OM Alpha Team
Posts: 10753
Joined: 21 Jan 2013, 14:55
Location: Burnham on Crouch, Essex UK

Re: Station Configuration not looking for band worked

Post by G4POP »

You cant but perhaps try running both the portable and the installed versions of Log4OM concurrently - One for rig 1 set up and the other for rig 2 setup
73 Terry G4POP
Post Reply