Log4OM v2.17 and WSJT-X

Post Reply
vk2qv
Novice Class
Posts: 9
Joined: 24 Jan 2020, 05:38

Log4OM v2.17 and WSJT-X

Post by vk2qv »

Hi
While changing the bands in WSJT-X software RX Band is not changing in Log4OM. It only change the Band filed in Log4OM.
Is there a settings somewhere to set that both Bands can follow the WSJT-X selected band?

See attached example- i have selected 30m band from WSJT-X.

Thanks in advance.

73 Ras VK2QV
Attachments
Log4OM band settings.JPG
Log4OM band settings.JPG (51 KiB) Viewed 1820 times
User avatar
G4POP
Log4OM Alpha Team
Posts: 10749
Joined: 21 Jan 2013, 14:55
Location: Burnham on Crouch, Essex UK

Re: Log4OM v2.17 and WSJT-X

Post by G4POP »

More info required

What log4om version number
What CAT control are you using
What radio
What CAT is selected in WSJT
Running as admin on what programs
73 Terry G4POP
vk2qv
Novice Class
Posts: 9
Joined: 24 Jan 2020, 05:38

Re: Log4OM v2.17 and WSJT-X

Post by vk2qv »

Hi

here are the information

What log4om version number - v2.17.0.0
What CAT control are you using - nil
What radio - Yaesu FTDX101
What CAT is selected in WSJT - CAT
Running as admin on what programs - all

73
User avatar
G4POP
Log4OM Alpha Team
Posts: 10749
Joined: 21 Jan 2013, 14:55
Location: Burnham on Crouch, Essex UK

Re: Log4OM v2.17 and WSJT-X

Post by G4POP »

Unless Log4om is connect via Omnirig for CAT control and WSJT also then clearly no freq or mode is displayed

See the user guide
73 Terry G4POP
N6VH
Old Man
Posts: 186
Joined: 07 Nov 2015, 15:41

Re: Log4OM v2.17 and WSJT-X

Post by N6VH »

Ras,

Check the "QSO Info" tab in the "Edit QSO" screen for a station you have logged from WSJT-X (possibly using JTAlert?). You will probably find the correct band and frequency listed in both "RX Band" and "RX Freq". I know it works this way if using JTAlert, and probably logging directly from WSJT-X, although I haven't tried the latter. This should happen, even if Log4OM is not connected to CAT.

73,

Jim N6VH
vk2qv
Novice Class
Posts: 9
Joined: 24 Jan 2020, 05:38

Re: Log4OM v2.17 and WSJT-X

Post by vk2qv »

Jim
Sorry if i was not clear earlier. The problem is when I change the band from WSJT Log4OM 'RX Band' is not following the band. It only change the Band filed in Log4OM.
When the QSO was logged it is correct. In UI RX Band is not following the radio/WSJT selected band.
I believe it is nothing to do with CAT.

See attached.
Log4OM band settings_1a.JPG
Log4OM band settings_1a.JPG (181.9 KiB) Viewed 1792 times
73 Ras
User avatar
DF5WW
Log4OM Alpha Team
Posts: 2031
Joined: 02 May 2013, 09:49
Location: Kraam, Rhineland Palatinate, Germany
Contact:

Re: Log4OM v2.17 and WSJT-X

Post by DF5WW »

It can´t change the band in Log4OM so the data from WSJT-X/JTDX is only transferred by logging.
Before you see a change in Log4OM you have to log a qso at the new band first. All other things
only working if both programs connected by CAT control (Omnirig and all as administrator).
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
vk2qv
Novice Class
Posts: 9
Joined: 24 Jan 2020, 05:38

Re: Log4OM v2.17 and WSJT-X

Post by vk2qv »

Hi
I assume when you said "It can´t change the band in Log4OM" the RX Band? Coz Band is following the WSJT-X without CAT configuration.
Cheers
N6VH
Old Man
Posts: 186
Joined: 07 Nov 2015, 15:41

Re: Log4OM v2.17 and WSJT-X

Post by N6VH »

Ras,

Personally, I don't worry about the band displayed in Log4OM, as long as the QSO gets logged correctly. Just my opinion.

73,

Jim N6VH
Post Reply