hi all ,
i have connected my FTDX-10 with my pc and downloaded the latest omnirig , set the port at com7 but the frequentie stays offline
what am i doing wrong ?
FTDX-10 CAT problem
-
DF5WW
- Log4OM Alpha Team
- Posts: 2033
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: FTDX-10 CAT problem
Have you set the correct baud rate ? Check the transceiver menu (manual) for the COM settings and
check how your COM7 is set to and Omnirig. All must have the same baud rate. Looks that 1.20 is the
latest original from Afreet Software and should be run but i can´t test so my both transceivers can´t
longer handle CAT after a lightning flash a few weeks ago.
check how your COM7 is set to and Omnirig. All must have the same baud rate. Looks that 1.20 is the
latest original from Afreet Software and should be run but i can´t test so my both transceivers can´t
longer handle CAT after a lightning flash a few weeks ago.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
