When using the Recent QSO tab, and you right-click on the grid column title. You get a menu. If you select the Edit Table Layout. The system opens a window. That is not seen. I can see that the window is open by moving the mouse over the taskbar LOG4OM item and it shows the 2 windows. By closing the Grid Configuration window from the taskbar I can get back to the main screen.
I have tried uninstalling and rebooting with a new install, but that has not fixed it.
Has anyone else had this problem
I am running Windows 10 home
Grid Configuration Missing
Re: Grid Configuration Missing
Bill,kd4rau wrote: ↑24 Nov 2021, 14:00 When using the Recent QSO tab, and you right-click on the grid column title. You get a menu. If you select the Edit Table Layout. The system opens a window. That is not seen. I can see that the window is open by moving the mouse over the taskbar LOG4OM item and it shows the 2 windows. By closing the Grid Configuration window from the taskbar I can get back to the main screen.
I have tried uninstalling and rebooting with a new install, but that has not fixed it.
Has anyone else had this problem
I am running Windows 10 home
By you noting you have done 'new installation' I'm assuming that it is: v2.18.0.0 ??
Have you tried to also open the "Edit Table Layout" from the Cluster (F8) tab? Each of those table layouts are individually adjustable from many different tables in Log4OM2.
When you open the Edit Table Layout and it does not directly display, but you noted you can see that it is open when you hover your mouse over the taskbar icon. What happens when you then click on that Edit Table Layout image when hovering over the taskbar icon?
.
73 - Nolan Kienitz - KI5IO
Plano, TX
Plano, TX
Re: Grid Configuration Missing
Simple answers here.
Yes to 2.18
I don't have a table in the cluster. Maybe I don't have something set up to get the cluster-info. But there is no table to click.
If you click the Grid Config window on the taskbar. Nothing happens. It just stays there. You cannot click the main window, without an error beep.
Yes to 2.18
I don't have a table in the cluster. Maybe I don't have something set up to get the cluster-info. But there is no table to click.
If you click the Grid Config window on the taskbar. Nothing happens. It just stays there. You cannot click the main window, without an error beep.
- G4POP
- Log4OM Alpha Team
- Posts: 10815
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Grid Configuration Missing
Log4OM/Settings/Program configuration
Edit program config meu
Click 'Reset Grid Layouts'
Save and apply
Edit program config meu
Click 'Reset Grid Layouts'
Save and apply
73 Terry G4POP
Re: Grid Configuration Missing
Thanks for you help here.
After doing these steps.
Edit program config meu
Click 'Reset Grid Layouts'
Save and apply
exit and restart both the application and computer.
The same problem exists.
After doing these steps.
Edit program config meu
Click 'Reset Grid Layouts'
Save and apply
exit and restart both the application and computer.
The same problem exists.
- G4POP
- Log4OM Alpha Team
- Posts: 10815
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: Grid Configuration Missing
Turn off firewalls and anti virus temporarily and test again
73 Terry G4POP
Re: Grid Configuration Missing
Not running any AV or Firewalls.
Re: Grid Configuration Missing
I got this fixed. Yes it took hours to figure it out.
So I at one time had 2 monitors on this computer. I stopped using the second monitor as it went bad. So it was completely disconnected from the computer.
It appears that the pop up was remembering that it at one time was on the other monitor and only would show up there. I connected a different monitor as the second monitor and bang.. It was working again.
I would suggest that if the reset button is pressed in the config menu, then all of the cached window locations be cleared.
What a pain, but it is now fixed.
Thanks for your help.
So I at one time had 2 monitors on this computer. I stopped using the second monitor as it went bad. So it was completely disconnected from the computer.
It appears that the pop up was remembering that it at one time was on the other monitor and only would show up there. I connected a different monitor as the second monitor and bang.. It was working again.
I would suggest that if the reset button is pressed in the config menu, then all of the cached window locations be cleared.
What a pain, but it is now fixed.
Thanks for your help.