Hi
For last couple of weeks since I installed Log4OM V2 hamlib was working properly and now
for last two days it is not connecting. It shows I am connected to my radio while its not.
Omnirig doesn't work either. WSJT-X works fine with hamlib on other port.
Few days ago I have upgraded to V2.3 and it stopped looking up QRZ for info etc so I have come back to V2.2
Please suggest what to do?
73
Bhanu
VU2MB
CAT Issues
Re: CAT Issues
Just wanna add that I am using Apache Labs ANAN 8000DLE as Kenwood TS2000.
These sdr's works on Kenwood TS2000's CAT commands.
73
Bhanu
VU2MB
These sdr's works on Kenwood TS2000's CAT commands.
73
Bhanu
VU2MB
- G4POP
- Log4OM Alpha Team
- Posts: 10815
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: CAT Issues
You cannot share a port with Hamlib, if you want to share the port with Log4OM and WSJT you must use Omnirig and that is what MUST be selected in WSJT
73 Terry G4POP
Re: CAT Issues
G4POP,
Thanks for your response. I am not sharing port. WSJT-X using a different pair Port 9 and 10
while Log4OM using port 7&8 and it was working for last few weeks.
73
Bhanu
vu2mb
Thanks for your response. I am not sharing port. WSJT-X using a different pair Port 9 and 10
while Log4OM using port 7&8 and it was working for last few weeks.
73
Bhanu
vu2mb
- G4POP
- Log4OM Alpha Team
- Posts: 10815
- Joined: 21 Jan 2013, 14:55
- Location: Burnham on Crouch, Essex UK
Re: CAT Issues
I am not familiar with it but presumably the software your using provides multiple CAT connections? Which use VSP's to connect to other software?
Hopefully a user that has same set up can help
73 Terry G4POP