ISSUE IN UPLOAD CONFIRMATIONS LOTW

V2 error reports
xe1aca
Novice Class
Posts: 5
Joined: 09 Jun 2021, 02:55

Re: ISSUE IN UPLOAD CONFIRMATIONS LOTW

Post by xe1aca »

Hi Hams

I went back to 2.13.0.0 and the issue of uploading to LOTW completed. I think there is a bug in the new version(2.14.0.0) since after I updated I started with the problem.

I´m use JTAlert ver. 2.16.17

Regards 73"
xe1aca
Novice Class
Posts: 5
Joined: 09 Jun 2021, 02:55

Re: ISSUE IN UPLOAD CONFIRMATIONS LOTW

Post by xe1aca »

n0iai wrote: 14 Jun 2021, 00:07 Same issue, rolled back to 2.13.0.0 LOTW uploads complete.
I went back to 2.13.0.0 and the issue of uploading to LOTW completed. :D ;)
xe1aca
Novice Class
Posts: 5
Joined: 09 Jun 2021, 02:55

Re: ISSUE IN UPLOAD CONFIRMATIONS LOTW

Post by xe1aca »

G4POP wrote: 13 Jun 2021, 09:44
HB9DBM wrote: 13 Jun 2021, 08:57 Hello again,

I just tried to upload to LOTW withon LOG4OM using QSL manager.
This is broken too.

Again, if I generate a ADIF for the selected QSO's and upload this ADIF using TQSL.exe , there is no issue. Works fast an reliable
Are you using Gridtracker?
Hi Hams

I went back to 2.13.0.0 and the issue of uploading to LOTW completed. :) ;)

I´m use JTAlert ver. 2.16.17
User avatar
G4POP
Log4OM Alpha Team
Posts: 10749
Joined: 21 Jan 2013, 14:55
Location: Burnham on Crouch, Essex UK

Re: ISSUE IN UPLOAD CONFIRMATIONS LOTW

Post by G4POP »

I suggest that you send a support request to Lele because none of the Alpha testers or I can replicate this issue so it has to be local to your setup.
73 Terry G4POP
User avatar
KI5IO
Log4OM Alpha Team
Posts: 1798
Joined: 16 Aug 2015, 16:30
Location: Plano, TX

Re: ISSUE IN UPLOAD CONFIRMATIONS LOTW

Post by KI5IO »

Have y'all considered trying to run your FTxx APP (JTDX or WSJTx) on a direct connection to Log4OM V2 as a test to see if the issue persists?

Meaning ... take JTAlert out of the loop?

Set up the direct connection as outlined in the most recent User Guide.

Give it a test and see what your results may (or may not) be.

Just a simple trouble-shooting technique ... simplify the installation one step at a time.
.
73 - Nolan Kienitz - KI5IO
Plano, TX
w0jd
Novice Class
Posts: 3
Joined: 14 Oct 2017, 01:25
Contact:

Re: ISSUE IN UPLOAD CONFIRMATIONS LOTW

Post by w0jd »

KI5IO wrote: 14 Jun 2021, 10:50 Have y'all considered trying to run your FTxx APP (JTDX or WSJTx) on a direct connection to Log4OM V2 as a test to see if the issue persists?

Meaning ... take JTAlert out of the loop?

Set up the direct connection as outlined in the most recent User Guide.

Give it a test and see what your results may (or may not) be.

Just a simple trouble-shooting technique ... simplify the installation one step at a time.
.
How is JTAlert "in the loop" when performing a manual upload to LOTW?
User avatar
G4POP
Log4OM Alpha Team
Posts: 10749
Joined: 21 Jan 2013, 14:55
Location: Burnham on Crouch, Essex UK

Re: ISSUE IN UPLOAD CONFIRMATIONS LOTW

Post by G4POP »

n0iai wrote: 16 Jun 2021, 14:33
KI5IO wrote: 14 Jun 2021, 10:50 Have y'all considered trying to run your FTxx APP (JTDX or WSJTx) on a direct connection to Log4OM V2 as a test to see if the issue persists?

Meaning ... take JTAlert out of the loop?

Set up the direct connection as outlined in the most recent User Guide.

Give it a test and see what your results may (or may not) be.

Just a simple trouble-shooting technique ... simplify the installation one step at a time.
.
How is JTAlert "in the loop" when performing a manual upload to LOTW?
It's not but sometimes the QSO information arriving from external software contains the wrong information which when applied to a LOTW upload causes a problem..
73 Terry G4POP
WH6A
New user
Posts: 1
Joined: 29 Apr 2020, 15:58

Re: ISSUE IN UPLOAD CONFIRMATIONS LOTW

Post by WH6A »

FWIW I get similar behavior when a log mismatch with LOTW station location data occurs.
Ex: log contains grid EL99ki LOTW station location specifies grid EL99lb

Start the LOG4OM2 upload and get:
INFO: ADIF File created successfully.
INFO: TQSL Version 2.5.8
No private TQSL Password set
Executing TQSL with upload

Then nothing happens, (waited overnight at least once) so force quit Log4OM2 upload

I troubleshot the issue by performing a manual upload of the same log using TQSL GUI and it returned error messages specifically stating the mismatched field issue.

Updated LOTW station location grid to match log and all is working fine with LOG4OM2 uploads to LOTW
Post Reply