Hi,
A month or so back I did a short /P operation, and changed Station Callsign to 4X1ST/P in the settings (operator and owner callsign are blank). After uploading the contacts, I reverted it to 4X1ST.
Now intermittently, the LoTW upload seems to hang/freeze for hours on end, until I cancel it.
When that happens L4OM uploads the 4X1ST QSOs to LoTW as 4X1ST/P (even though that callsign isn't shown in the settings anywhere).
Any ideas what's happening please?
73 Tim
L4OM 2.21.1.0, Win 10
QSOs uploaded to LoTW with wrong callsign
- DF5WW
- Log4OM Alpha Team
- Posts: 2035
- Joined: 02 May 2013, 09:49
- Location: Kraam, Rhineland Palatinate, Germany
- Contact:
Re: QSOs uploaded to LoTW with wrong callsign
Have you changed also your LotW informations in the setup? Normally you need an extra information for a /P callsign like certificate and station information.
73´s .. Juergen ... ALT-512 SDR (10W) , 50 m random wire at SG-211 autotuner, 2 x Xiegu G90 (20W HF TRX) one as portable Radio. Also TS-790E (40 W) for VHF/UHF with X-50 vertical and Duoband 4-Element LPDA.
Re: QSOs uploaded to LoTW with wrong callsign
Update TQSL to latest version. From the TQSL release notes:
2.6.1: Fix a major error in handing previously uploaded QSOs that can cause TQSL
to either hang or keep asking how to handle those QSOs.
73, Markus HB9BRJ
2.6.1: Fix a major error in handing previously uploaded QSOs that can cause TQSL
to either hang or keep asking how to handle those QSOs.
73, Markus HB9BRJ
Re: QSOs uploaded to LoTW with wrong callsign
No, I didn't change the LoTW config when I did the /P QSOs. Its always set to my "home" location, although I do have a separate certificate for /P. I also have "Send My Station updated data to LOTW" set.
Re: QSOs uploaded to LoTW with wrong callsign
Thanks. I've updated TQSL now
It seems to have stopped the "hanging".