always no tx fldigi & log4om

[F1SMV]

GE Bojan and the group

Bojan i put same same cfg than yous screen copy , but always nothing

SQ5TDZ, i think this new version must be update..i will continue use wsjt with dx labs in waiting next version. After more one week its'enough hi...

Ik0Tix , no ..with old version i dont split any port all run very well may its possible to use this part in new version i dont know i am not coder

thank all for your help

73 Eric

[IK0TIX]

I confirm, in my case also, that TCP/IP only allows me to synchronize the frequency but does not send the rig in TX.
I tried the settings for Bojan: no TX

[G4POP]

I confirm, in my case also, that TCP/IP only allows me to synchronize the frequency but does not send the rig in TX.
I tried the settings for Bojan: no TX

Please read my reply in this thread https://forum.log4om.com/viewtopic.php? ... =10#p25352 radio is controlled from FLDigi not from Log4OM

[IK0TIX]

so the problems are due to fldigi?
we have to wait for a new release

[HB9VQQ]

There is no problem currently. I have all working fine with FLdigi and Log4OM.

[SQ5TDZ]

but for everything to work well you need to use vspe software ?

[HB9VQQ]

You need a virtual serial port emulator.

Unbenannt.JPG (46.63 KiB) Viewed 4794 times

[SQ5TDZ]

ok thanks, too bad it doesn't work without vspe
Regards

[HB9VQQ]

If two Programs want to talk to the same physical USB Port you always need some sort of virtual serial port.

[SQ5TDZ]

in the older version log4om v1 and fldigi, worked without vspe