frequencies of the 2 VFOs

[iz2rlo]

hello, has anyone using flaxradio managed to see the two vfo frequencies in log4om?
what configuration you need to do
thanks

[KD0ZV]

That does not work but it has been requested.

[G4POP]

hello, has anyone using flaxradio managed to see the two vfo frequencies in log4om?
what configuration you need to do
thanks

Only way to do that is to assign rig 1 and rig 2 in OmniRig to the two Flex CAT connections, thats one of the reasons why I sold my flex and went to SunSDR with the excellent TCI interface

[KD0ZV]

Only way to do that is to assign rig 1 and rig 2 in OmniRig to the two Flex CAT connections, thats one of the reasons why I sold my flex and went to SunSDR with the excellent TCI interface

That doesn't seem to work Terry. It should, but I have yet to make that function. SmartSDR cat shows OmniRig connected to both ports/slices but Log4om still does not seem to work.

2022-04-20_17-42-39.jpg (209.77 KiB) Viewed 1747 times

[G4POP]

It does if you switch from rig 1 to rig 2, or it did for me when I owned a Flex

Dont expect to see both VFO frequencies at the same time you need to switch in Log4OM

[KD0ZV]

Terry will not switch on mine. I have had a few times over the years where both VFOs actually showed up momentary but did not last and that was encouraging. But I cant switch back and forth.

This is not a Flex issue. This is a log4OM issue. The slices are on 2 different com ports. HamLib works so much better for the Flex but you have to start all your software in a certain order. Doing all this testing I got tired of shutting down everything and restarting.

I am sure its capable of doing both slices on the Flex if Lele would choose to.

Rich

[KD0ZV]

Note selector on both images and which slice shows up in Log4OM

[G4POP]

Have you tried with SDC?

[KD0ZV]

Well if I knew what SDC was, I would try it

[iz2rlo]

Thank you guys for your help,
if the problem is lo4om let's hope they fix it,
let's see if someone has solved
73 Cris iz2rlo