log40m does not see ic7300

docosso · Post by **docosso** » 01 Sep 2016, 23:26

I have a new icom 7300 and trying to connect to my computer. running win 10 can someone help please

Post by **G4POP** » 02 Sep 2016, 09:27

1. Download and install Omnirig
2. Select Omnirig in the Log4OM options CAT/Cluster tab
3. Select the 7300 in the Omnirig settings dialog and match the com port and baud rate to that of your radio
4. Turn on radio and restart Log4OM

docosso · Post by **docosso** » 02 Sep 2016, 12:46

thanks Dan I got it working. you the Man!!!

docosso · Post by **docosso** » 02 Sep 2016, 12:48

oops sorry I got the wrong name terry thanks

docosso · Post by **docosso** » 08 Sep 2016, 21:37

problem solved

docosso · Post by **docosso** » 08 Sep 2016, 21:39

my icom 7300 does not change freq. from the log40m screen at a fast rate can anyone help

Post by **KI5IO** » 09 Sep 2016, 00:59

On your Omni-Rig Settings screen set the Poll Int. to 100 ms.

This would be for Rig 1 assuming your have your Icom noted for Rig 1.

docosso · Post by **docosso** » 11 Sep 2016, 12:06

got it problem solved thanks

log40m does not see ic7300

log40m does not see ic7300

Re: log40m does not see ic7300

Re: log40m does not see ic7300

Re: log40m does not see ic7300

Re: log40m does not see ic7300

Re: log40m does not change freq. fast enough on ic7300

Re: log40m does not see ic7300

Re: log40m does not see ic7300