CAT survey. Please vote.

[VK7XX]

I've plans and a working prototype of a "log4om CAT" (some text deliberately omitted)

excellent !!!!!!!!

[J85K]

FYI -- Using Yaesu FT 2000 transceiver. No other rig at tested.

-- OMNIRIG -- assumed that poll associated my post comment .....



Regards,

Kumar_J85K

[G4POP]

FYI -- Using Yaesu FT 2000 transceiver. No other rig at tested.

Regards,

Kumar_J85K

Er! Omnirig or Hamlib?

[WQ4A]

OmniRig!


Paul
WQ4A

[wa6gxq]

I have two rigs ic-746 non pro. and ic-707. I have the ic-746 working with omnirig. the ic-707 is not covered in omnirig. In hamlib the rig is covered, but will not work. The ic-707 Works fine with HRD. I use the ic-707 a fair amount. Is there any help with this isuue?? I don't think ham is a reliable product. please help.. thanks

[G4POP]

Did you try any of the other Omnirig selections for the 707 many of the Yaesu set ups will work with others

[G1YBB]

As a new user I went for Omnirig (I think it mentioned in the user manual it may be the better option) and once I tweaked the baud rate in the rig from it's default, is working lovely.
No reason to change, and I have recommended a friend use it also, after recommending Log4OM to him and him loving it too.
Omnirig on FT-897D

[VE3VEE]

I have a remote QTH with TS-480. I used to use Omnirig, but at one point it stopped working and after a lengthy experimenting with it I gave up and switched to Hamlib.

I don't recall what exactly it was that caused my Omnirig issue. It might have been an addition of a new hardware (at the remote site) and/or new software (at home), but yes, at one point I was no longer able to use LOG4OM with Omnirig.

I'm sure this post is not very helpful... sorry... if I do recall what my issue was, I will post details.

73 Marvin VE3VEE

[wa6gxq]

Did you try any of the other Omnirig selections for the 707 many of the Yaesu set ups will work with others

I tried other icom models, but no yaesu. i will try it. sorry about the late response. thanks

[wa6gxq]

Did you try any of the other Omnirig selections for the 707 many of the Yaesu set ups will work with others

I tried other icom models, but no yaesu. i will try it. sorry about the late response. thanks

Tried all Yaesu interfaces. no success.